ARCHIVE Under Seat Mounted Fire Extinguisher Mount, need feedback.
- Thread starter NLXTACY
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
NLXTACY
Wits' End
- Thread starter
- #682
Unfortunately my Medeco distributor couldn't get me anything this week so I will need to wait til Monday. So for three of the orders it means waiting til next week. Really sorry about that folks 
The other lids are getting laser etched and will be ready to go by tomorrow and I can ship out whatever is left and NOT waiting on a lock.
Also, for those that DID order the LockingLid, I included a small washer with your key. Because there could be stacked tolerance difference from lid to lid, there may not be enough clearance for the zinc plated locking cam. If you find this is the case then remove the nut, washer and cam and place the washer under the cam then reassemble. That will give you plenty of room to get the locking cam under the lip of the FEM. When you are locking the lid you may find that the locking cam contacts the FEM, this is by design.
The other lids are getting laser etched and will be ready to go by tomorrow and I can ship out whatever is left and NOT waiting on a lock.
Also, for those that DID order the LockingLid, I included a small washer with your key. Because there could be stacked tolerance difference from lid to lid, there may not be enough clearance for the zinc plated locking cam. If you find this is the case then remove the nut, washer and cam and place the washer under the cam then reassemble. That will give you plenty of room to get the locking cam under the lip of the FEM. When you are locking the lid you may find that the locking cam contacts the FEM, this is by design.
NLXTACY
Wits' End
- Thread starter
- #684
Ok all you fence sitters now is your time!!!!
I am indeed doing a second run of the FEM-1 Fire Extinguisher Mounts. Some notes:
• I can't afford to make as many as last time because I don't have the disposable income to let these sit for 7 months again.
• I am only doing half the amount I did last time so unfortunately it means my individual cost goes up by a lot.
• BUT if I do NOT make and weld the tabs for the optional Toyota switch then I can save just enough money to keep the price the same.
• Out of 12 people I've talked to, not one has used the optional Toyota switch port.
• I will keep the knockout there just not produce/weld the extra tabs.
• If you want the tabs I can include them and you can add them using JB Weld.
• I have plenty of material to make more of the Accessory Switches so feel free to order up.
• IF you have a LockBox, or thinking about getting one, AND you are getting a LockingLid then please send me a note and I will make sure that they will be keyed alike.
BTW I have plenty of the Cargo Liners and plenty of the LockingLids
Quit slacking
Fire Extinguisher Mount
CargoLiner
LockingLid
I am indeed doing a second run of the FEM-1 Fire Extinguisher Mounts. Some notes:
• I can't afford to make as many as last time because I don't have the disposable income to let these sit for 7 months again.
• I am only doing half the amount I did last time so unfortunately it means my individual cost goes up by a lot.
• BUT if I do NOT make and weld the tabs for the optional Toyota switch then I can save just enough money to keep the price the same.
• Out of 12 people I've talked to, not one has used the optional Toyota switch port.
• I will keep the knockout there just not produce/weld the extra tabs.
• If you want the tabs I can include them and you can add them using JB Weld.
• I have plenty of material to make more of the Accessory Switches so feel free to order up.
• IF you have a LockBox, or thinking about getting one, AND you are getting a LockingLid then please send me a note and I will make sure that they will be keyed alike.
BTW I have plenty of the Cargo Liners and plenty of the LockingLids
Quit slacking
Fire Extinguisher Mount
CargoLiner
LockingLid
I really hope my wife bought me one for Christmas
If not...
I had been intending to buy the extinguisher mount for awhile but blah, blah, blah...I'm a slacker like the rest of us. Then I noticed on Facebook that you guys were now selling t-shirts. The t-shirt was what it took to finally lure me through the door and then load up my cart with other goodies too.
At any rate, once I get one mount, I'll probably wish I had two, so I hope you make another run at some point.
And my wish list while I'm here...
1) An accessory mount for my unused third row upper seat belt mounts.
2) More t-shirt designs
Cheers,
Eric
Congrats but SONUVABITCH!!!
Do the next batch as a pre-sale. Your reputation is stellar within the mud community. Wouldn't be a concern for me. Give you the money and get it in a month or two. Works for me.
Have it be a "last ditch, snooze you lose" sale. And charge an extra $5 juice for those of us that are slackers. Just to remind us not to f$&# around and wait next time.
I'd be in for a pair of extinguisher mounts with lids & liners on your next run.
Unfortunately, I missed out on the first run and kept putting off the purchase thinking that you had a large stock.
I like etarasoff's idea re: 3rd row seat belt mounts. I'd be interested to see what you come up with for that and would probably add that to my shopping cart, combine that with your battery cut off/gauge/accessory mount thingy & maybe a t-shirt or two.
LS1FJ40
SILVER Star
I'm in! Will order Friday!
Edited 
Last edited:
LS1FJ40
SILVER Star
@etarasoff FTW!
NLXTACY
Wits' End
- Thread starter
- #689
Ok that's the 3rd PM about @etarasoff's post. Right about now would be a good time to edit the post Eric.
Ok that's the 3rd PM about @etarasoff's post. Right about now would be a good time to edit the post Eric.
Oh, Joey, you're no fun any more...but I just can't quit you...
Sent from my Nexus 6
Off to PMing members. Later.
NLXTACY
Wits' End
- Thread starter
- #697
@etarasoff made it all good with an order. Now I get to funnel that to the PMers 
Well, you probably won't get any more PMs now...
For the record, the preceding quote may not be the actual words, tboughts or opinions of @NLXTACY...
...sorry, I can't help myself tonight. I'm acting out after having to go back to work after two weeks off.
LS1FJ40
SILVER Star
I'm looking forward to my prize with order for finding the typo on his website!
Oh and you should get your package from me on Friday. The same day I order my FEM. My son is looking forward to you being indebted to him! HAHAHAHAHAHAHA
Oh and you should get your package from me on Friday. The same day I order my FEM. My son is looking forward to you being indebted to him! HAHAHAHAHAHAHA
