ARCHIVE Under Seat Mounted Fire Extinguisher Mount, need feedback.

[NLXTACY]

@MoustacheMike I am waiting for the quote now. I think I'm going to try and reduce my per unit cost by producing the PS as well. I think.

I'm making a 60 Series and 100 Series FEM as well but I'm not far enough along to start production on those or else this would have been perfect. Oh well.

 

[S.CarolinaFZJ80]

Well, I did have a large stock. Just didn't think there would be a run of them this week

Did you see what I posted above in response to Eric's wish list?

The battery disconnect is happening. I've been using my "free time" to clean up the wiring to make it more pretty.

I did afterwards, I think I started typing that post as you were posting yours and I got pulled away from the task before hitting "Post Reply". Anyway, that second idea looks cool! Always interesting to see the new stuff your working on.

 

[LS1FJ40]

@MoustacheMike I am waiting for the quote now. I think I'm going to try and reduce my per unit cost by producing the PS as well. I think.

I'm making a 60 Series and 100 Series FEM as well but I'm not far enough along to start production on those or else this would have been perfect. Oh well.

I'm fine with waiting until you get off your ass for the 60 and Hundy FEM...

 

[MoustacheMike]

I'm fine with waiting until you get off your ass for the 60 and Hundy FEM...

Ditto, I can wait till you're finished with the new projects/products

 

[Gorilla]

Hi, I missed out! I want "NEED" one, or two!!!

 

[NLXTACY]

All the lids themselves are done and just waiting for the new-new locking cams to be deburred and then zinc plating. I've already got the boxes so these are finally about ready to ship.

I'm still waiting on the quote for the FEMs.

 

[msapers]

Thanks for the order Eric!

I've had a couple people tell M they are waiting for what I come out with next and hold off ordering.

It's ok. It's a good problem I guess.

As for your wish list:
1) do you mean like this
View attachment 1177658

Or like this?:
View attachment 1177659

And 2) yup, I have three more designs I'm working on

My screen printer is on vacation til 1/4/16 so I have at least that long to work on it and get feedback.

A first aid kit mount???? Son of a bitch. I need that!!!!! I was just thinking about where to mount one. Damn, I love your stuff!

 

[NLXTACY]

A first aid kit mount???? Son of a bitch. I need that!!!!! I was just thinking about where to mount one. Damn, I love your stuff!

Yeah that thing I've been working on since around January. I've done about 9 different prototypes this far and I'm still trying to figure out how best to complete it. It's been close for months but I haven't had the focus yet to complete it because I have so many projects that are so close to being done.

 

[msapers]

Yeah that thing I've been working on since around January. I've done about 9 different prototypes this far and I'm still trying to figure out how best to complete it. It's been close for months but I haven't had the focus yet to complete it because I have so many projects that are so close to being done.

Take your time, it gives me a chance to slowly embezzle money from our joint account save up with my wife's full support.

 

[NLXTACY]

Take your time, it gives me a chance to slowly embezzle money from our joint account save up with my wife's full support.

Haha, yeah Ive had a few messages about covert purchasing

 

[Dubbinchris]

Yeah that thing I've been working on since around January. I've done about 9 different prototypes this far and I'm still trying to figure out how best to complete it. It's been close for months but I haven't had the focus yet to complete it because I have so many projects that are so close to being done.

Maybe best to make it fit an off the shelf first aid kit. I like the adventure medical series, especially the marine ones. I have several.

 

[NLXTACY]

Maybe best to make it fit an off the shelf first aid kit. I like the adventure medical series, especially the marine ones. I have several.

The first aid kit isn't so much the issue at this point. Its about maximizing space and making smart attachment points.

 

[msapers]

Being a former EMT, I'm good with building my own kit, just need the mount.

 

[NLXTACY]

Being a former EMT, I'm good with building my own kit, just need the mount.

I'm all ears when it comes to attaching the kits. I've working on something stable but removeable.

 

[Dubbinchris]

Looks like you were creating some sort of thin mountable box. I'd say something with a secure yet quick release door to allow a pre packed pouch typical of most small first aid kits to come out quickly. I'm a former medic myself.

 

[NLXTACY]

So let me just start on new thread on this particular project. If I don't at least start getting you guys involved to keep me motivated to work on it then it'll take me another 6 months because I'm constantly being distracted by other stuff.

A first aid kit mount???? Son of a bitch. I need that!!!!! I was just thinking about where to mount one. Damn, I love your stuff!

Being a former EMT, I'm good with building my own kit, just need the mount.

Looks like you were creating some sort of thin mountable box. I'd say something with a secure yet quick release door to allow a pre packed pouch typical of most small first aid kits to come out quickly. I'm a former medic myself.

 

[retrofive]

Have you started a new thread yet?

 

[NLXTACY]

Have you started a new thread yet?

 

[NLXTACY]

Have you started a new thread yet?

Yes
80 Series D-Pillar Mount

 

[NLXTACY]

FINALLY got the redone locking cams. Only a week late. Ugh. Dropping off to the zinc plater now and will pick up tomorrow and ship out tomorrow.