Tricky clutch bleading.

Joined
Jun 28, 2005
Messages
22
I just put in a new trany and I am having trouble with the clutch. Basically I have no preasure. The hard line is higher than the Master cylinder on the fire wall so my mechanic tells me it is close to impossible to get it all out. I have a Auto Zone master cylinder in it right now, would a toyota master make the difference? Is it possible to install a bleader in the top of the line on the fire wall? Your advice is greatly needed.
 

tonkota

 
Joined
Sep 28, 2004
Messages
2,130
Location
Spokane, WA
Use a baby booger sucker and a hose. Fill the bulb with fluid. Put the hose on the bleeder on the slave, and push the fluid up through the system, then close the bleeder.

This is the best way I have found to bleed this particular system.
 
Top Bottom