#drugsarebadmmmmkay
TLC on UsedVictoria thread... (ongoing) (13 Viewers)
- Thread starter asutherland
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Nanaimo : listed last week for $400. It was my second choice when I was looking at winches. Now down to $350
It has been upgraded to have free spool. Originally sold on a Jccp.
It has been upgraded to have free spool. Originally sold on a Jccp.
I’d bet there’s a straight 6 under the hood of this “FJ Cruiser”.
Didn’t bother taking a new picture after, as he puts it, “I done rust repair on doors, and roof…”.
I especially love it when there are pictures of different rims & tires, and other things. I really wouldn’t want to know what I would be paying $25k for.
Didn’t bother taking a new picture after, as he puts it, “I done rust repair on doors, and roof…”.
I especially love it when there are pictures of different rims & tires, and other things. I really wouldn’t want to know what I would be paying $25k for.
GTSSportCoupe
2LTE abuser
Much cheaper than they would have been new. Decent option for anyone wanting 315/75R16 (35" tires).
www.usedvictoria.com
Used.ca | Classifieds for Jobs, Rentals, Cars, Furniture and Free Stuff
www.usedvictoria.com
Last edited:
Wonder what that cutting job that had this as leftovers was?
Fairly cheap for clean steel chunks tho.
Fairly cheap for clean steel chunks tho.
Steel Plate. 3/8 thick A36/44W. 21 inch diameter discs - materials -...
Steel Plate. 3/8 thick A36/44W. 21 inch diameter discs. Have 370 pcs of these left over from a cutting job at Island Waterjet. Sell $25 each disc. This is 20% of new cost. Also have the remains of...
nanaimo.craigslist.org
Anyone planning to crate ship their rig. All you’d need to add is a 4” hole in the middle and 6 stud holes.Wonder what that cutting job that had this as leftovers was?
Fairly cheap for clean steel chunks tho.
Steel Plate. 3/8 thick A36/44W. 21 inch diameter discs - materials -...
Steel Plate. 3/8 thick A36/44W. 21 inch diameter discs. Have 370 pcs of these left over from a cutting job at Island Waterjet. Sell $25 each disc. This is 20% of new cost. Also have the remains of...nanaimo.craigslist.org
stevebradford
In the shop
Those look like great machine or tool bed plates to me
Cool vice.
Can't be yours tho. Shop is way to clean.
I might pick up a couple of those after the weekend. EDIT- If his map is right he's actually pretty close to me.
Can't be yours tho. Shop is way to clean.
I might pick up a couple of those after the weekend. EDIT- If his map is right he's actually pretty close to me.
stevebradford
In the shop
If you are grabbing some get me two as well, add it to my tab.
I just emailed him to see. He had almost 400 so I suspect he'll still have a few.
I gotta ask wtf was cut out....
1988 Landcruiser bj60 - cars & trucks - by owner
- 1988 Landcruiser BJ60 - 3B Turbo Diesel - AXT Turbo Upgrade - 311,000 klms - Tan Exterior - Brown Interior 2 tone - 4 speed manual - Rear ARB Locker - Rust Free body and frame is very clean -...
victoria.craigslist.org
not mine, I would love to buy it but don't have the space
GTSSportCoupe
2LTE abuser
1988 Landcruiser bj60 - cars & trucks - by owner
- 1988 Landcruiser BJ60 - 3B Turbo Diesel - AXT Turbo Upgrade - 311,000 klms - Tan Exterior - Brown Interior 2 tone - 4 speed manual - Rear ARB Locker - Rust Free body and frame is very clean -...victoria.craigslist.org
not mine, I would love to buy it but don't have the space
I've seen that one around and it looks good. That is a hell of a good deal in todays market. Jeeez. If I was an a****** I'd buy it and flip it.
stevebradford
In the shop
Somethings are not right about it:
- It’s a fj60 body from a gas cruiser. 1988? those had square headlights.
- Says 3b motor and with a 4speed trans so it’s a 1983 or earlier 3b likely ~ not the worst.
- 4speed in a 1988 so it’s had a downgrade on the transmission.
- Says it has ac that’s really rare for a 3b around here. Probably cobbled the previous gas motor’s ac compressor brackets to the 3b somehow.
- tire alignment on a solid axle? After they been into the front end, hopefully just a toe adjustment issue? But they shouldn’t be working on cruisers if they can’t figure that out.
Sounds like a basket case to me. Almost every part of this truck has been cobbled together from parts off other cruiser’s worked on by who knows! However for that price in todays market it might be the going rate for the amount of work you would have to put into it.
- It’s a fj60 body from a gas cruiser. 1988? those had square headlights.
- Says 3b motor and with a 4speed trans so it’s a 1983 or earlier 3b likely ~ not the worst.
- 4speed in a 1988 so it’s had a downgrade on the transmission.
- Says it has ac that’s really rare for a 3b around here. Probably cobbled the previous gas motor’s ac compressor brackets to the 3b somehow.
- tire alignment on a solid axle? After they been into the front end, hopefully just a toe adjustment issue? But they shouldn’t be working on cruisers if they can’t figure that out.
Sounds like a basket case to me. Almost every part of this truck has been cobbled together from parts off other cruiser’s worked on by who knows! However for that price in todays market it might be the going rate for the amount of work you would have to put into it.
Last edited:
stevebradford
In the shop
Only one picture.
I actually believe I met this cruiser before. If it’s the one I’m thinking of the body is pretty clean.. but they used a picture here from years ago for the dating site.
I actually believe I met this cruiser before. If it’s the one I’m thinking of the body is pretty clean.. but they used a picture here from years ago for the dating site.
Last edited:
lowenbrau
SILVER Star
Same photo (plus others) here. Was in WA in 2019
Street-Spotted: Toyota Land Cruiser FJ60
This plush SUV was Toyota's Range Rover fighter
1988 Landcruiser bj60 - cars & trucks - by owner
- 1988 Landcruiser BJ60 - 3B Turbo Diesel - AXT Turbo Upgrade - 311,000 klms - Tan Exterior - Brown Interior 2 tone - 4 speed manual - Rear ARB Locker - Rust Free body and frame is very clean -...victoria.craigslist.org
not mine, I would love to buy it but don't have the space
Actually emailed… no surprise, no reply.
Most likely a scam or an intentional misrepresentation of a total puss bucket.
If it’s too good to be true…. well, you know the rest.
Crusty
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Has a burnt exhaust valve on cylinder #4. I have no motivation to fix it. Still runs and drives, has a rough idle. Within the last 3,000km I've replaced the timing belt, tensioner, water pump, thermostat, belts, cat back exhaust, rear window motor, cap and rotor. Comes with Thule roof racks. Has some body rust but frame is great.
- windshield replaced in March
- alternator replaced last year
- lower ball joints, cv axles replaced in 2019
- 33x10.5 Hankook dyna pros installed in 2019, lots of tread left
- A/C system serviced this year
Not a TLC but it belongs here. @crustyBJ60, get off your wallet and buy this thing so we can go get it stuck!
www.usedvictoria.com
Used.ca | Classifieds for Jobs, Rentals, Cars, Furniture and Free Stuff
www.usedvictoria.com