Oh yeah I forgot to find a picture of that one, it's made by a company called Bent Up.
Tech Questions Here (3 Viewers)
- Thread starter Volunteer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I like them all Brian. There is a lady here in TX that is getting ready to buy a FJ i will show here these pics.
I love kangaroo killers
You can have mine from the troopie...
I like em all Brian... I like the Metal Tech ones enough that if you could get the front and rear for the same price of the front of the others then I'd get the Metal Tech. Especially w/ the lights. Sweet.
If you do decide on the MT and want to order and see if we can save on shipping....let me know.. I'm about to order a roll bar setup for the Troopy from LT at Metal Tech..
Good luck w/ your decision. Looks like you can't make a bad one
me
Oh cool, I'll get with you on that Scott. I'll have to check and see how long it would take them to get the stuff made though. Your rollbar might be ready long before they can get to mine.
tabascoloco
SILVER Star
I never liked tube bumpers myself. They always leave the cheapest/easiest/homemade impression upon me. At least I don't think I'd want to spend much on a tube bumper myself. That said, no doubt they can be super strong and practical too. I've seen them capped with a schrader / presta valve fitted for compressed air, etc. I prefer to reserver tubing for cages, nerf bars, roll cages, etc myself.
I LIKE the combination of tubing with angled/ARB /metaltech though...just not for the MAIN bumper. I prefer the look and function of the flat plate like ARB for that. Seen pictures of accidents head-on with ARB and that thing is strong...and looks great too! of course its more than twice cost of tube.
I LIKE the combination of tubing with angled/ARB /metaltech though...just not for the MAIN bumper. I prefer the look and function of the flat plate like ARB for that. Seen pictures of accidents head-on with ARB and that thing is strong...and looks great too! of course its more than twice cost of tube.
Yep I'm really torn between them now. I think regardless of what front I get I will go with the metaltech rear bumper. I like the protection on the sides from it.
Mine is ready to go but no worries. I told LT I'd get w/ him after the holidays.
Just let me know if you decide to go that way and no worries if not.
I'm gonna ship it to the FedEx Freight Depot and go pick it up there. Easier.
me
Well after thinking some more and my typical flip flopping I think I'm going to get the ARB front and metaltech rear. Metaltech is an ARB dealer so we can still do it together. I'm not sure when they will have rear bumpers ready to ship, last I heard was after Christmas. If you are already waiting until after then it should work out.
Do you know how long the fedex place will hold shipments? It's always possible that I will be gone when something arrives.
I sent a message to Mark at metaltech about this also.
Do you know how long the fedex place will hold shipments? It's always possible that I will be gone when something arrives.
I sent a message to Mark at metaltech about this also.
My self I like a tube bumper pretty well, weight is alot less I would imagine. Mine when I went to put it on I didnt need suports or a helping hand to put on, just held it in place with one hand, and started the threads with the other (a lip was resting on top of the frame though)
Another thing is that winch access is alot easier than on a plate bumper, atleast the ones I have seen in person.
That road armor one looks plenty bad ass though
EDIT:
Didn't read this page and see that you had allready decided what you where getting already.
Another thing is that winch access is alot easier than on a plate bumper, atleast the ones I have seen in person.
That road armor one looks plenty bad ass though
EDIT:
Didn't read this page and see that you had allready decided what you where getting already.
tabascoloco
SILVER Star
...or go with super-sized tubing, cap both ends, schrader valve, fill with compressed Helium...
I dont know, wouldnt compressed helium weigh about the same as air at ambient pressure?
tabascoloco
SILVER Star
J/K of course, but it would obviously depend on whether or not you compressed it to liquid state or not....and since your massively thick-walled tube bumper would indeed allow such extreme pressures, I'd say that liquid helium would be about 7 times lighter than liquid air. (air is mostly Nitrogen btw) since liquid Helium weighs about 1lb/gal and liquid air over 7lbs/gal.
But, regardless of how you look at it, you'd be adding weight of course...
What weighs more: pound of gold or pound of helium? LOL
It's pretty hard to get Helium to liquid state...usually only commercially available as a liquid since it is so hard to do....
Anyway, just for fun, think about this: as compressed gases, neither one would way much...a 70ci tank at 3000psi of air = just over 10 ounces of air and the same tank with Helium would add 1.4 ounces of weight to your bumper....
LMAO....
But, regardless of how you look at it, you'd be adding weight of course...
What weighs more: pound of gold or pound of helium? LOL
It's pretty hard to get Helium to liquid state...usually only commercially available as a liquid since it is so hard to do....
Anyway, just for fun, think about this: as compressed gases, neither one would way much...a 70ci tank at 3000psi of air = just over 10 ounces of air and the same tank with Helium would add 1.4 ounces of weight to your bumper....
LMAO....
Josh, thanks for the input. I was really sold on the tube bumper till mike reminded me of some things about the plate bumpers. I did hit a deer in a company truck in Arkansas a couple of months ago and it really wiped out the front end. I think the ARB will help me keep up with the arms race on the highways too, more mass is better LOL.
I hit a tree At the SCC wathing you come threw the water Brian. I left a mark on the tree and the bumber looks like nothing happened.
- Thread starter
- #197
I hit a tree At the SCC wathing you come threw the water Brian. I left a mark on the tree and the bumber looks like nothing happened.
Damn we didn't get that on video
The genuine Kangaroo killers are hard to beat when going up against a tree 
LOL nice one Corey.
Ok I have a few things I'm thinking about now.
1. I never bought a new truck before, or mod one for that matter. Everything is more expensive. Grr when the mod madness first hit I was a little blinded to it, now I want to just get everything done and stop buying **** LOL.
2. Winches: Warn M8000 is probably big enough for my truck @ about $700
Warn 9.5XP will supposedly resist corrosion and **** better @ about $1000
Could also go with a XD9000 for about $850
3. Front Bumper: Settled on ARB now. Metaltech said they could do it for $1170 shipped at any time.
The problem is there is a set of IPF fog lights that go in the bumper. I do not think
they are included with the Metaltech price. I'm waiting for word on that now.
I have found the bumper + lights @ performanceproducts4trucks.com --
The site says $1168 shipped.
The light set alone is stupid expensive, about $300
4. Often the shipping costs change between a commercial address with loading dock or a residence, because of the weight of the bumper. It is often a difference of $60 - $100. I'm guessing the free shipping prices are to a commercial dock. Does anyone know someone with such a dock that I could ship to? 75% of the time I will be working so I could not pick it up right away.
Any thoughts?
1. I never bought a new truck before, or mod one for that matter. Everything is more expensive. Grr when the mod madness first hit I was a little blinded to it, now I want to just get everything done and stop buying **** LOL.
2. Winches: Warn M8000 is probably big enough for my truck @ about $700
Warn 9.5XP will supposedly resist corrosion and **** better @ about $1000
Could also go with a XD9000 for about $850
3. Front Bumper: Settled on ARB now. Metaltech said they could do it for $1170 shipped at any time.
The problem is there is a set of IPF fog lights that go in the bumper. I do not think
they are included with the Metaltech price. I'm waiting for word on that now.
I have found the bumper + lights @ performanceproducts4trucks.com --
The site says $1168 shipped.
The light set alone is stupid expensive, about $300
4. Often the shipping costs change between a commercial address with loading dock or a residence, because of the weight of the bumper. It is often a difference of $60 - $100. I'm guessing the free shipping prices are to a commercial dock. Does anyone know someone with such a dock that I could ship to? 75% of the time I will be working so I could not pick it up right away.
Any thoughts?
Last edited:
- Thread starter
- #200
Only that it sounds like a sweet setup bud, new winch, bumper and lights. Sorry no help with the dock.