does antone have a part # for what relay I need or where to get it?
taurus fan relay (1 Viewer)
- Thread starter FJ40Dude75
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I'd like that information, too. Right now I'm running that fan/shroud setup with a Flex-A-Lite thermostatic relay. :
http://www.pirate4x4.com/tech/taurus/
Nice write up about the fan and relay. If you go to the tech section(pirate site) and do a search there is a pretty long thread about this and other fan related stuff.
***found MORE
http://www.fordmuscle.com/archives/2003/02/electricfan/index.shtml (Ford Hot Rod guys)
http://www.jacksongalleries.com/alex/jeep/taurusfan/ (sheep guys)
Nice write up about the fan and relay. If you go to the tech section(pirate site) and do a search there is a pretty long thread about this and other fan related stuff.
***found MORE
http://www.fordmuscle.com/archives/2003/02/electricfan/index.shtml (Ford Hot Rod guys)
http://www.jacksongalleries.com/alex/jeep/taurusfan/ (sheep guys)
That's what I'm looking for!!!
- Thread starter
- #5
thanks thats what I needed
Just as a test, measure the fan speed direct to the battery and then through the relay.
I have a flexilight 110 and the fan speed was considerably less through the relay than the battery. So I just wired mine to the battery with a 50amp switch. I cools MUCH better now.
HTH,
I have a flexilight 110 and the fan speed was considerably less through the relay than the battery. So I just wired mine to the battery with a 50amp switch. I cools MUCH better now.
HTH,
