My rebuilt 1fzfe is installed, and even with the plugs removed, the starter is not able to turn the motor. The battery is probably not quite 100% after 3 months of sitting in the garage, but my charger shows it to be OK. I'm going to trickle charge it for a while, but I'm wondering if there is a problem with the starter itself.
I am able to turn the motor by hand with a breaker bar on the crank bolt. I left the coil wire un-installed, and I pulled the EFI fuse.
Any ideas?
I am able to turn the motor by hand with a breaker bar on the crank bolt. I left the coil wire un-installed, and I pulled the EFI fuse.
Any ideas?