That's what I am going with then. Thanks for the quick responses...
So I contacted TRS about a REAL group buy for projectors, lets get it going! (1 Viewer)
- Thread starter FullyLitLED
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
That's what I am going with then. Thanks for the quick responses...
FullyLitLED
Supporting Vendor
- Thread starter
- #322
I went 5k 35w morimoto! Remember that your 55w ballast will make a 6k look more like a 4.5k!
Also, I have ordered the H7 and 9006 adapter plate, I havent used any of them in any retrofits yet hahah just an FYI!
FullyLitLED
Supporting Vendor
- Thread starter
- #323
I went with the 4300K. Does that mean my 55w DDM ballast is gonna make the 4300 look more 3000K? Don't want that
FullyLitLED
Supporting Vendor
- Thread starter
- #325
Well my 6k 55w matches my 35w 4.5k fog lamps! So its some ways down on the list! If you think 6k 55w is too blue then maybe just go 1-2k down on the kelvin rating? Do not worry, call TRS tomorrow and they will change your order! They will not ship them out today anyway!
Well my 6k 55w matches my 35w 4.5k fog lamps! So its some ways down on the list! If you think 6k 55w is too blue then maybe just go 1-2k down on the kelvin rating? Do not worry, call TRS tomorrow and they will change your order! They will not ship them out today anyway!
Now I don't know what to do? I want the light to be more white than blue.
FullyLitLED
Supporting Vendor
- Thread starter
- #327
I always thought your bulbs and ballasts had to be the same wattage.
FullyLitLED
Supporting Vendor
- Thread starter
- #329
according to DDM, there is only one type of bulb! The difference is in the ballast!
gotcha
FullyLitLED
Supporting Vendor
- Thread starter
- #331
So I got a pic to help smm3 out!
Here is the 4300k color temp bulb
this is 35w, so 55w should make it look white! You are safe IMO
Here is the 4300k color temp bulb
this is 35w, so 55w should make it look white! You are safe IMO
jonharis
Adventure Imports
So I got a pic to help smm3 out!
Here is the 4300k color temp bulb
this is 35w, so 55w should make it look white! You are safe IMO
Are you serious.
I thought 4300K would be more yellow! So I ordered 5000K. According to the chart I posted many pages earlier, 5000K is as white as it gets!
FullyLitLED
Supporting Vendor
- Thread starter
- #333
Are you serious.
It could be the camera! Just wanted to prove that it was not yellow!
jonharis
Adventure Imports
petrotk40 said:
Anyone ever find out why the 50W ballast is not on the kit?
jonharis said:
They burn up the projector. There has been reports of the 50W kits causing the inside to melt after a few weeks/months They run way to hot for a mini. I would run the 50W in a full size projector only.
Sent from my iPhone using IH8MUD
uhoh...
TRS Shrouds MELTED! wtf!
I read a few threads about the 55W DDM Kits burning up the Mini's. Problem is the DDM Kits run extremley hot. My 55W 5000K HID Bulbs run at 297*F. Now seal that up in a projector the size of a fist and see what those temps are.
EDIT: Some conflicting information. I guess you guys with 55 and 50W kits will have to see. I personally did not want to take the risk so ordered 35W ballasts with the upgraded bulbs. We will see. I hope the 4300K XB35's are not blue blue. But WHITE
I read a few threads about the 55W DDM Kits burning up the Mini's. Problem is the DDM Kits run extremley hot. My 55W 5000K HID Bulbs run at 297*F. Now seal that up in a projector the size of a fist and see what those temps are.
EDIT: Some conflicting information. I guess you guys with 55 and 50W kits will have to see. I personally did not want to take the risk so ordered 35W ballasts with the upgraded bulbs. We will see. I hope the 4300K XB35's are not blue blue. But WHITE
FullyLitLED
Supporting Vendor
- Thread starter
- #340
I second this! I read that thread too!
On another note, my DDM tuning kit decided to go stupid...so good thing I got the stage III kit with morimoto HID
anyones order say shipped yet?
