Snowball II (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Pallet arrived with the bumper kits today. I have almost the entire front tacked together for finish welding. Even following Luke's directions to do the frame mounts first and shim them it is a very tight fit.
 
Pic.

1424486571744.jpg
 
You running a body lift on that pig?
 
Ya but I thought the "wings" covered the turn signal on Luke's bumper...
 
Copy that. I'll ask Luke next week.
 
Pallet arrived with the bumper kits today. I have almost the entire front tacked together for finish welding. Even following Luke's directions to do the frame mounts first and shim them it is a very tight fit.

Does Luke have directions posted up someplace for the front bumper kit?
 
Looks great man! You are sure motivated to get things done! I hope to start on mine on the next week or so. Everything fit as expected?
 
The front was a little funky, but that's to be expected on something 4x4labs hasn't had in production for very long.
The rear had some pretty large gaps (3/8") to fill on the lower part of where the wings fit the main shell, otherwise it's been an easy project.
 
I'd hoped to have the rear completed and painted today, but there ended up being some missing parts for the spindle assembly which took me a few hours to hunt down locally. I was also missing the little ball studs for the gas strut, but considering the size of the group buy a few missing things isn't surprising.
I have swing-out pretty much complete, but need to add the highlift bracket and antenna mount to the tire carrier. I'm thinking I need to add a stud catch to lock the swing-out shut as the destaco latch leaves a lot to be desired.
 

Users who are viewing this thread

Back
Top Bottom