Anyone have pics of the newly released GX460 bumper?
Slee Bumper? (1 Viewer)
- Thread starter Littlehouse
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Where'd you see this? I wasn't able find anything searching...
- Thread starter
- #3
They had an Instagram post about the release, but I didn't see very good pics of the bumper.
This is the only pic I can find, looks like they did their new product review at the cruise moab event this past weekend.
Fingers crossed. Hopefully works for 2014+ as well...
r2m
Richard
Have you contacted them? I'm sure they'd be more than happy to send you a few pic's!
re_guderian
SILVER Star
I feel all funny down there...
Too bad I already have a Victory. Slee stuff is top notch.
I was in attendance last week in Moab and saw this in person at vendor night. Great looking option and Slee quality, as mentioned, is second to none.
They will have pricing/product page up on their site shortly, according to the team. They were sponsors on one of our trail runs so I spent half a day with their guys - super nice group.
The product specs will be very, very similar to their existing 470 offering - SLEE - Front Bumper - '03-09 Lexus GX470 - Slee Off Road - https://sleeoffroad.com/products/sok2056-b/?fbclid=IwZXh0bgNhZW0CMTAAAR0xB43ctvuGYwcDhNIi0ZRjJfqo2_6rItEWMi8KVpreOBXZ1tUUeRL0wig_aem_AeNtvAMHVAvv9jzU0GusKNvOml6MsGipDNGIu4GcW44TXKBhk1beJDMLwGwdcVIT85PJ_AWZ8IEMbhkxmnsOC_x7#bumper
They will have pricing/product page up on their site shortly, according to the team. They were sponsors on one of our trail runs so I spent half a day with their guys - super nice group.
The product specs will be very, very similar to their existing 470 offering - SLEE - Front Bumper - '03-09 Lexus GX470 - Slee Off Road - https://sleeoffroad.com/products/sok2056-b/?fbclid=IwZXh0bgNhZW0CMTAAAR0xB43ctvuGYwcDhNIi0ZRjJfqo2_6rItEWMi8KVpreOBXZ1tUUeRL0wig_aem_AeNtvAMHVAvv9jzU0GusKNvOml6MsGipDNGIu4GcW44TXKBhk1beJDMLwGwdcVIT85PJ_AWZ8IEMbhkxmnsOC_x7#bumper
Any news on a rear?
Should work since it's a straight cut across the bumper, but the 2014+ grille will extend all the way to the Slee bumper
Looks like Slee added the bumper for all model years, not just 2010-13.
sleeoffroad.com
SLEE - Front Bumper - '10-'23 Lexus GX460 - Slee Off Road
Features Made from 3/16" High Strength Alloy with 3/8" Frame mount brackets. Removable top stinger. Stinger only fits '10-'13 model years. Stinger can fit Baja S8, OnX6 and Rigid 20" light bars (Sold separate). Fog Light Buckets accept Nacho, Baja or similar lights (Sold separate). Modular bolt...
sleeoffroad.com
r2m
Richard
Christo makes some good quality accessories. I have their twin ARB compressor mount on my GX and had one on our old Hundy.
Oooweeee. I just installed their skids. If dissent doesn’t come up with one by eoy, then this is it
Wow, thanks for the heads-up! Ditto on Dissent, but they seem wholly uninterested in the GX460 in my messages with them. I've been pestering Nguyen Works to make a front bumper 
Anyone have insight on what this means?
When I was there the beginning of the year, Rebecca made it seem highly likely and dependent on interest. I’m on the list to get the front bumper, I am assuming they are trying to hit a minimum before they commit.Wow, thanks for the heads-up! Ditto on Dissent, but they seem wholly uninterested in the GX460 in my messages with them. I've been pestering Nguyen Works to make a front bumper
I’ll be up there in May and will bug them for sure!
Ill message them again, then. Thanks!
Please do, unfortunately Rebecca has left and Col will be gone in 3 weeks
I called Slee and talked to them about the new bumper. They were super helpful over the phone. It appears to be a fantastic bumper but does create some issues that need to be dealt with. 1) the washer bottle needs to be relocated, 2) the bumper removes the turn signals and the solution they recommend is to get new headlights with some integrated signals, and 3) new fogs would need to be purchased. As far as creating high quality bumpers that look integrated with the vehicle I think they did great. The core issue for me personally is the cost when you add in all these items. With out labor, tax or shipping you are looking around $4500. For the right buyer I'm sure that isn't an issue and the quality is high to meet that price tag. Just a little too rich for me.
I was ready to pull the trigger if they would offer the bumper in raw steel.
