For Sale SLC UT: FJ80 Engine Partout

[Fourrunner]

I replaced a 1991 3FE engine a few years back and stripped the usable parts. Best reasonable offer on any part shown. Will ship at buyers expense. Let me know if you see something that interests you. Can provide more pictures if necessary. Parts may fit an fj62 as well.

Complete engine harness
Cruise control mechanism
Intake manifold (upper and lower)
Various mounting brackets
Bellhousing plate
Oil cooler
Flex plate
Front and rear exhaust manifolds
Power steering pump
Smog pump
Ac pump
Starter
Crank pulley
5 of the 6 pistons
Oil pump
Smog equipment
Distributor

 

[Bryan Smith]

The cable on the top left of the mat- it goes from the box on the firewall to the throttle body (if I’m looking at it right). Let me know your thoughts shipped to 83634.

 

[4Cruisers]

Interested in the exhaust manifolds and heat shields. Cost shipped to 87544? Thanks.

 

[Fourrunner]

I think the heat shields are sold, but the manifolds are available. Message me and we can figure out shipping/price.

 

[EWheeler]

@Fourrunner Did the exhaust manifolds sell? If not, I'm interested.

Thanks,

Evan

 

[Fourrunner]

Lots of parts still available.

 

[zachmartin529]

Do you still have the AC Belt Tensioner/Pulley and distributor? Need both ASAP! Thanks.

 

[Fourrunner]

Which one is the AC belt tensioner/pulley? Is it item 1 or 2?

I do have either one of those brackets/pulleys along with the distributor. Throw me a reasonable offer.

 

[zachmartin529]

Which one is the AC belt tensioner/pulley? Is it item 1 or 2?


View attachment 2755515

I do have either one of those brackets/pulleys along with the distributor. Throw me a reasonable offer.

It looks like item 1. I'll have to look at mine and double-check as it's for an FJ62.

 

[Fourrunner]

Ok...let me know. Both parts are available.

 

[Saleem]

Interested in the crank pulley and idler pulleys

 

[reelemin]

Do you happen to have the power steering pump pulley?

 

[Fourrunner]

I don't. Mine was bent. I did see a Facebook post with a part number that would work though. See below...no experience, but might work.

 

[reelemin]

I don't. Mine was bent. I did see a Facebook post with a part number that would work though. See below...no experience, but might work.

View attachment 3807400

Thanks for the reply! I am looking for the power steering pump pulley. It has a key way slot in the center so this wouldn’t work for my application due to the key way slot.

 

[Fourrunner]

Oh...my bad.