- Location
- United States
I'm selling a nearly new ARB Base Rack that was initially purchased for and mounted on an LX570. It will fit all 200 series Cruisers and Lexus LX570 from 2008-2021. The rack itself will fit a multitude of vehicles (any other Cruiser, 4Runner, GX, etc.) as long as the proper mounting rails/feet are purchased. The rack is fully welded extruded aluminum. It's VERY stout, but also very light.
The rack is complete with several accessories including a 3/4 side rail kit (easily removable), canoe roller out back, wind fairing up front, plus two different (height) sets of mounting rails. One set of mounting rails clears the shark fin antenna if your 200 or LX570 is equipped, and the other pair of rails mounts the rack ~1" lower, but will not clear the shark fin (unless you make minor mods). The side rail kit is easily removed for a totally flat rack to mount a roof top tent. This is the 3/4 length rack (61" long and 51" wide) and comes to roughly the back of the sunroof/B-pillar on a 200 or LX570. The rack is in very good shape, but does have a few scuffs from being mounted for a short time, and being moved around while in storage (the pics show lots of dust too).
The part number for the rack kit with the mounting rails, 3/4 side rails and wind deflector is BASE43 ($1528 online).
The additional canoe/lumber/Aunt Edna roller kit is 1780365 ($88 online).
Plus the additional shorter mounting rail kit comes with it as well as all mounting hardware.
ARB offers tons of other accessories for the Base Rack system too - recovery board mounts, awning mounts, light mounts, tent mounts, gas bottle mounts, hi lift mounts, etc... HERE
I'd like to get $1000 for all of it. I will consider selling it for a little less without all the accessories.
Located in West Jordan, UT. No shipping.
Bryson
801-949-5326 call or text
The rack is complete with several accessories including a 3/4 side rail kit (easily removable), canoe roller out back, wind fairing up front, plus two different (height) sets of mounting rails. One set of mounting rails clears the shark fin antenna if your 200 or LX570 is equipped, and the other pair of rails mounts the rack ~1" lower, but will not clear the shark fin (unless you make minor mods). The side rail kit is easily removed for a totally flat rack to mount a roof top tent. This is the 3/4 length rack (61" long and 51" wide) and comes to roughly the back of the sunroof/B-pillar on a 200 or LX570. The rack is in very good shape, but does have a few scuffs from being mounted for a short time, and being moved around while in storage (the pics show lots of dust too).
The part number for the rack kit with the mounting rails, 3/4 side rails and wind deflector is BASE43 ($1528 online).
The additional canoe/lumber/Aunt Edna roller kit is 1780365 ($88 online).
Plus the additional shorter mounting rail kit comes with it as well as all mounting hardware.
ARB offers tons of other accessories for the Base Rack system too - recovery board mounts, awning mounts, light mounts, tent mounts, gas bottle mounts, hi lift mounts, etc... HERE
I'd like to get $1000 for all of it. I will consider selling it for a little less without all the accessories.
Located in West Jordan, UT. No shipping.
Bryson
801-949-5326 call or text
