cruzerDave
Land Shark Outfitters
I've designed a single, universal KISS Drawer and need (1) beta tester to confirm my design and installation instructions for 80 series. Please PM or email me at landsharkoutfitters aht geemail if you're interested.
In general this is intended to be 'universal' so you would need to:
- Decide how you want to anchor it based on your needs. If you want to use the tried-and-true bolts through the frame that I use on the full set there will be pre-scored locations on the anchor pieces (orange circles below, showing both left and right locations), and you just need to drill them out and order the bolts. If you want to use turn-buckles, order those instead. I will be providing links to where to get examples of the various options for you to buy directly, which saves you money and me headaches (one-man-show-on-the-side remember)
- Decide whether you want handles or blanks (above and below in orange). The backside of the front will be lightly scored in the shape of the handle cutout, and if you want a cutout you would buy a $5 coping saw and make that cut yourself (very easy). If you want blanks for your own handle, you source and attach the handles.
- And of course decide how you want to finish and customize them
- I will sell wing kits as well, and strongly recommend those be purchase with the drawer in order to save shipping costs.
I still need to work up dollars on all this, but will give the beta tester as much of a discount as possible in exchange for working with me to tweak anything, lots of photos, lots of feedback, and an honest review to folks on here.
These will be shipped as part of the next run, closing very soon, so you should have the drawer on your doorstep in 3-4 weeks.
Any questions others would have please post here, or PM/email me if you want to be that beta tester!
In general this is intended to be 'universal' so you would need to:
- Decide how you want to anchor it based on your needs. If you want to use the tried-and-true bolts through the frame that I use on the full set there will be pre-scored locations on the anchor pieces (orange circles below, showing both left and right locations), and you just need to drill them out and order the bolts. If you want to use turn-buckles, order those instead. I will be providing links to where to get examples of the various options for you to buy directly, which saves you money and me headaches (one-man-show-on-the-side remember)
- Decide whether you want handles or blanks (above and below in orange). The backside of the front will be lightly scored in the shape of the handle cutout, and if you want a cutout you would buy a $5 coping saw and make that cut yourself (very easy). If you want blanks for your own handle, you source and attach the handles.
- And of course decide how you want to finish and customize them
- I will sell wing kits as well, and strongly recommend those be purchase with the drawer in order to save shipping costs.
I still need to work up dollars on all this, but will give the beta tester as much of a discount as possible in exchange for working with me to tweak anything, lots of photos, lots of feedback, and an honest review to folks on here.
These will be shipped as part of the next run, closing very soon, so you should have the drawer on your doorstep in 3-4 weeks.
Any questions others would have please post here, or PM/email me if you want to be that beta tester!