Sagging seat belts?
- Thread starter YEAHMAAN
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jul 20, 2004
- Threads
- 274
- Messages
- 23,205
- Location
- Chandler, AZ
- Website
- www.tontorecreationalliance.org
I have done this with some success:
Minute Mod- Fixing Seatbelt Retractors
I take the belt off, run it through the washing machine. Once clean, spray some lube, I use silicone dry slide, on the part of the belt that will run over the pillar mount point. Tighten the spool until the spring stops, then back off 1/2 a turn and reinstall the belt. Makes a good improvement.
Minute Mod- Fixing Seatbelt Retractors
I take the belt off, run it through the washing machine. Once clean, spray some lube, I use silicone dry slide, on the part of the belt that will run over the pillar mount point. Tighten the spool until the spring stops, then back off 1/2 a turn and reinstall the belt. Makes a good improvement.
sweet....
Silicone fixes sagging. Whoulda thunk it? 
