Rhino 4x4 Front Bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Ferris,
What have you got bolted to the underside of the outer sections in front of the tires? Is that something you made? Or some part that Rhino sent?
Thanks,
Robert

It is a part provided by Rhino. It serves two purposes:
  1. Keep grime, dirt, etc. from getting up inside the bumper where the sensor, headlight washer, and fog light connections are.
  2. An upward lip at the rear edge keeps the wheel well in place (you cut the existing plastic wheel well liner to the right length).

1636490823726.webp
 
It is a part provided by Rhino. It serves two purposes:
  1. Keep grime, dirt, etc. from getting up inside the bumper where the sensor, headlight washer, and fog light connections are.
  2. An upward lip at the rear edge keeps the wheel well in place (you cut the existing plastic wheel well liner to the right length).

View attachment 2834671
Thank you! I will be emailing Rhino to see if I can get a couple of these.
 
Thank you! I will be emailing Rhino to see if I can get a couple of these.

The absolute easiest way to request replacement parts (which I had to do for various missing items) is to mark the missing pieces on the inventory checklist (see below, your missing covers are the "LOW COVER" on the right-middle edge) and then chat with Rhino via WhatsApp (use the link on the bottom of their website) - they're very responsive that way. Paula handles the WhatsApp communication and is also in charge of getting the orders set up and out the door.

If you ordered your bumper directly from them, I assume they'll just send you the parts at no cost. Otherwise if you bought the bumper from someone else, then just ask for a quote for the missing pieces. They gave a very fair price (plus shipping) when I talked to them for what I was missing.

1636491619079.webp


1636491649762.webp
 
hmmm this is a new one to add to the mix. Doesn’t look like it has a hoop option. But that’s not a deal breaker. Hmmmmm
 
Hello everyone, first post on here. I just got a LX570 and building it up a bit. I first saw this bumper and loved it. An I ordered mine.

The thing that confuses me is everyone is talking about prices $4,000 plus and Australia.

I am not sure if people know but these bumpers are NOT made in Australia. They are made in Argentina! You can imagine the shipping this to Australia and then back to USA from Argentina is a huge expense.

If you order from them in Argentina they are ~$1,700 and $700 shipping to USA for $2,400 total shipped to the USA.

Still expensive but about half of what some people paid.

This is what it is going on. Just put wheels and tires. I moved the AHC sensors in front, but don't know if will need long term new springs so I won't mess up the suspension with the weight of the bumper and winch on the AHC. I won't raise it more since I like how it cruises like this and has a more than enough lift for me in high.

Well hopefully this helps you guys.

Contact Paula at Rhino 4x4 in Argentina. +54 9 3513908520. They have whats app if you add them on chat. Tell them Chris sent you.








View attachment 2552481
Is the what's app still the best way to contact them regarding orders or does anyone have a current email address to begin correspondence?
 
Is the what's app still the best way to contact them regarding orders or does anyone have a current email address to begin correspondence?
Whatsapp is the way to go, you get immediate response and it's super easy back-and-forth communication.
 
Is the what's app still the best way to contact them regarding orders or does anyone have a current email address to begin correspondence?
Whats app is best, and you can call them. Paula is a sweetheart. Fyi in Argentina they may be off until after the 10th.
 
How did you guys pay for the bumper? I received an email and they stated that payment to be made via bank transfer. Normally i wouldn't do this. wanted to see what you all have done
 
How did you guys pay for the bumper? I received an email and they stated that payment to be made via bank transfer. Normally i wouldn't do this. wanted to see what you all have done
Yes, bank wire transfer. They give pretty detailed instructions how to do it. Honestly, not sure there would be a better way for them to do it without risking reversed charges and such (basically customers stealing), without a U.S. presence to fight abusive customers.
 
Well, crypto would be better as far as fees likely, but that is a bridge too far for most companies still.
 
How did you guys pay for the bumper? I received an email and they stated that payment to be made via bank transfer. Normally i wouldn't do this. wanted to see what you all have done
They are very legit and honest dont worry.
 

Users who are viewing this thread

Back
Top Bottom