REPLICA OEM - SSTs (1 Viewer)

[TRAIL TAILOR]

EDIT------- I've gotten a request for more NLA OEM tools. So the thread title has changed!



It's taken a bit to get these made for what I feel is a decent price to offer up for you guys. But here we go...

Normalized 4130 Chromoly (yes I overbuild... even tools) all will be CNC machined for precision accuracy and will have a machine finish.

$185.00 shipped to the lower 48.

Similar to the OEM tool 09634-60013 or 09634-60014, but without phoshate coating on the trunnion sleeves and shaft bolt. No need to waste money on something that will be immediately damaged once installed for use...

Available for purchase on the CruiserMart store.

Knuckle Centering Tool



J

 

[Tapage]

That's a real good price considering the OEM tool actual price .. gotta include manual of how to use it ..

 

[TRAIL TAILOR]

That's a real good price considering the OEM tool actual price .. gotta include manual of how to use it ..

D,

Coolerman has a great write up that I plan to use as "instructions"

J

 

[NateMob]

Pardon my ignorance, who would need these tool to help with a front end rebuild? (40,60,80..)

 

[TRAIL TAILOR]

Pardon my ignorance, who would need these tool to help with a front end rebuild? (40,60,80..)

These are for the 40, 55, 60 and 70 series. IIRC, the 80 doesn't have the same procedure for the knuckle. I'd have to dig into a 80 FSM for verification though.

J

 

[TRAIL TAILOR]

As far as tool use Coolerman has a good write up here in the FAQ section:

Steering knuckle centering tool instructions (FAQ)

or the FSM"

 

[megolfer]

This wont work with an 80

 

[TRAIL TAILOR]

Machine shop will start cutting next Tuesday.

I got the arm dialed in and have ordered the stainless steel to get these cut.

J

 

[OGBeno]

Great work Jason.

 

[TRAIL TAILOR]

The machine shop received the wrong material yesterday. So these will be delayed 2-4 days.

I'll let everyone know when they are ready.

J

 

[nogo]

Bump....I thought there would be more enthusiasm for this!

 

[TRAIL TAILOR]

Bump....I thought there would be more enthusiasm from this!

I've had quite a few PMs and emails on the tools. Just waiting to get them in hand now. Material delays, the holidays... etc..

Hopefully soon....


To answer one question for all to see.

QUESTION- " Will you be making a second run of these...?"

ANSWER- Not, unless I get 20 or more paid customers in advance.

Reason why, Most all specialty items made for the cruisers (mine or other vendors) has an excellent reception and initial sell out and then the new wears off so to speak. Every "second" round I've made takes 5X as long to sell. I just don't want inventory sitting on the shelf for years.

 

[TRAIL TAILOR]

Got the stainless arms made today. Fine cut consumables and some adjustments and I'm very happy with the final product.

J

 

[Spike Strip]

Are they all spoken for, or ... ?

I think I know the answer, but just wanna check ... Will these do early drum front brakes ?

Any chance of making this one, too?

 

[nogo]

Any chance of making this one, too?

I believe what you have pictured there is SST 09606-60010, this tool is used to push the steering arm off.

 

[Spike Strip]

Yes, I know.

Toyota calls it a Steering Knuckle Bearing Remover and Part # is updated to 09606-60020-01

 

[megolfer]

Will u make one for the fj80 axle

 

[TRAIL TAILOR]

Will u make one for the fj80 axle

C, Did they make this tool for the 80? Or is it just the same tool with a larger seal hub to accept the scribe pilot? I don't know the 80 tools too well.

J

 

[TRAIL TAILOR]

Yes, I know.

Toyota calls it a Steering Knuckle Bearing Remover and Part # is updated to 09606-60020-01

I've had quit a few inquiries, but I haven't taken any orders yet. Looks like the machinist will have extra material and I told him to make as many as he had materials for.

SO as of today there are a some remaining even if everyone buys one that says they will.

Jason

 

[megolfer]

Not sure if they ever made it for the 80 series. It might just be bigget