replaced ABS harness + sensors | light still on!

[peepers]

i replaced the lower part of my ABS harness from its location under the d-side fender to the sensors. I also replaced both sensors and the ABS orange warning light is still on.

what is my next step? is there a way to reset the light?

 

[Trunk Monkey]

Have you pulled the code on the ABS system? You can jump two of the contacts on the diagnostic hookup on the pass. side firewall. The ABS light will flash the number for the code. FSM will have the contacts you jump and I think it has the ABS codes.

 

[Mike S]

Reset by pulling the battery cable or the main EFI fuse.

M

 

[peepers]

i'll try first by pulling the fuse. the guy i bought the truck from is a good fella and he said he got the code and it was the sensor so it should be taken care of. i will pull the fuse for a few hours... let things re set.