I must have ordered the wrong dash blank. Need to call Redarc. But if anything else I am posting pictures to document how the dash comes apart. I have mixed history of taking apart interior body parts without messing something up. Plus loosening a panel that says “SRS Airbag” makes me cringe. I did remove the (two) screws that hold the knee airbag panel so I could move it down a bit. But I successfully tore into the dash to unsuccessfully install the Redark brake controller. I did buy a $15 plastic trim tool set. It helped to use the straight flat tool about 3/4” wide. I did not find a lot of pictures of the dash panel removal and especially where the clip locations are. That would have helped me feel better about diving into this. So here are some pictures that may help future do it yourselfers.