Rear Brake Caliper Shields (1 Viewer)

[AK Wes]

I just purchased a set of rear brake calipers from PowerStop, but they didn’t come with the replacement “shields” for the calipers. Does anyone know if these parts can be sourced separately?

I looked at parts diagrams, but I can’t find the shields sold separately from the caliper…. I may have missed something though.

Here are some photos of my new install and the old calipers with shields installed for reference:

 

[GTV]

Clean them up and swap them over.

 

[JunkCrzr89]

Clean them up and swap them over.

x2

 

[SR5BFG]

Does anyone have the part number for these (mounting bolts would be helpful too)? My LC doesn't have them and looking to add them.

 

[SR5BFG]

Does anyone have the part number for these (mounting bolts would be helpful too)? My LC doesn't have them and looking to add them.

Answering my own question...found the part numbers:
47777-60020 shield
90105-06282 bolts

 

[AK Wes]

Answering my own question...found the part numbers:
47777-60020 shield
90105-06282 bolt

Thanks for posting this info!

I couldn't find the shield part # at all for some reason and the shield bolts were completely rusted into the caliper on my brakes. I ended up grinding down the bolt heads completely to get the shields off on mine, then spray painted the old shields and reused them. I would have rather just bought some new shields.....

If you don't want to buy the Toyota brand bolts, you can go pick up 4 M6-1.0 x 10mm hex bolts from a hardware/auto parts store.