My Radiator is toast any ideas on a radiator repair shop or the best place to start looking for a replacement??
Thanks.
-Travis
Thanks.
-Travis
Radiator replacement/fix (1 Viewer)
- Thread starter Mongofj60
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Good repair shop in seneca, or you could buy the radiator off Ghens parts cruiser I dont think he sold it yet.
- Thread starter
- #3
Is he still in town??
yep, said he is leaving on friday i think
ClemsonCruiser
Supporting Vendor
yeah he is in town, and the radiator is sitting up at alans........ just shoot Gehn a PM
i think the 3fe and 2F rads are different so it may not drop in...
Shop opinions?
They can do a lot with radiators. I replaced the
one in our 60 and IT sprang a leak. It finally blew the top
just about off. Leaked the whole way down the top edge.
I thought I'd have to replace again. $$$$$...Rad shop guy
took one look and said "no problem". Laid the rods to
it and it works fine. Watch the cap pressure on these rads.
It's pretty low. BTDT
Watch for fit issues with after market rads. BTDT.
Don't let Birfield play in the Cruiser Fluids such as antifreeze.....
.....just yet anyway!
They can do a lot with radiators. I replaced the
one in our 60 and IT sprang a leak. It finally blew the top
just about off. Leaked the whole way down the top edge.
I thought I'd have to replace again. $$$$$...Rad shop guy
took one look and said "no problem". Laid the rods to
it and it works fine. Watch the cap pressure on these rads.
It's pretty low. BTDT
Watch for fit issues with after market rads. BTDT.
Don't let Birfield play in the Cruiser Fluids such as antifreeze.....
.....just yet anyway!
