I made up some adapters to make radiator flushing easy. Just remove your radiator hoses (upper & lower) and replace them with the adapters, screw on your garden hose, and let it run. They are for loan just PM me arrange pick up.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
My set up above is just for the radiator but with the radiator disconnected the rest of the system is easy to flush.Will this flush the whole cooling system, or just the radiator?
Reviving an old thread. I’m going to flush my coolant system to convert to Toyota Red. I’d like to make my own kit, so I have it at my disposal. Do you have the specs on these adapters? What size radiator hose did you use? What size PVC adapters?
After I clear the coolant system with the hose, I’d like to flush with distilled water. Any suggestions for pressurizing distilled water to run through the system?
Thanks!
My adapter are buried somewhere and with 110° temp Im not looking. A quick trip to HD with a radiator hose in hand would be my choice.
RO water is fine for what your needs are in the end both RO and distilled consist of only H2O molecules just the process is different. My system for changing color is a solid reverse flush of the system including all heater lines and the block drain. Fill with RO water and drive until hot. Then re-drain (including the block) if during the drain I feel there is any antifreeze present I repeat. Finally Toyota red with RO water.