- Thread starter
- #41
And then the box
In case you are wondering, I had to remove the box from the jack, push everything under the car and strap it back on again, but I managed all this before my help arrived. Putting it in without the transfer case is the way to go. If the exhaust is removed you can bolt it all up on to the cross member, but fit the rod to the TX gear lever and the 4x4 warning lamp sensor plug first. if the exhaust remains in, then leave the cross member off and let the box hang down a bit to fit the transfer case.
In case you are wondering, I had to remove the box from the jack, push everything under the car and strap it back on again, but I managed all this before my help arrived. Putting it in without the transfer case is the way to go. If the exhaust is removed you can bolt it all up on to the cross member, but fit the rod to the TX gear lever and the 4x4 warning lamp sensor plug first. if the exhaust remains in, then leave the cross member off and let the box hang down a bit to fit the transfer case.