Post you wheel and tyre size

[Gorilla]

Hey guys,

Hope this isn't covered anywhere else, but wanted to get an idea on what size wheels and rubber you are using and if possible lift height also referenced with a pic.

Something like this:

Wheels:
Diameter and width:
Offset:
Tyre Size
Lift Height
Pics:

 

[alaska60]

I bet you would have faster results by checking the registry of 60 series rigs at the top of the forum. You'll find over 1200 photos of 60 series rigs that are stock oem as well as lifted with 37's

Have fun........

Oh and by the way....
I'd get a 70 series like your sig states....
Just cause I cant get one!

 

[Gorilla]

Yeah I check that pretty much everyday and have gone through every pags, but most owners dont post their wheel size. Reason i ask i want to get wheels..(Before i have the truck haha) from Japan something like this

I have always wanted a 60. I sold my 80 series recently, and figured a 40 will be too much work, and the 70's are all 2 door so i think im set on a 60. just waiting for a nice one to come up and 12HT!

 

[Pighead]

I think those wheels would look better on a 100 series...

 

[sk8salomon]

I think those wheels would look better on a 100 series...

lol, x 2

 

[Methusalem]

Oi! Like Alaska said, watch the top of the forum. But anyway, here's your picture! If you wanna see more of my rig, check my introduction thread or garage.

Wheels: Alloy (don't know the brand)
Diameter and width: 15 x 8. To narrow. Would like to have 10", but can't find them in Suriname.
Offset: 4.5". Should be a little less.
Tyre Size: BF Goodrich 35 x 12.5/R15 (love them!)
Lift Height: 4" suspension + 1.5" body

 

[motoman426]

Wheels: el cheapo 15" good enough to weld headlocks to
Tires: 37-14-15
Spring over front with one extra leaf
4 leaf rear with 17" big horn air shocks in rear
1.5" wheel spacers in the front to keep from hitting leaf pack

 

[Rigger]

From the FAQ section:

https://forum.ih8mud.com/60-series-wagons/86386-wheels-work-part-numbers.html

https://forum.ih8mud.com/60-series-wagons/14641-im-getting-new-tires.html

https://forum.ih8mud.com/60-series-wagons/27305-so-what-kind-tires-you-guys-running.html

 

[alaska60]

From the FAQ section:

https://forum.ih8mud.com/60-series-wagons/86386-wheels-work-part-numbers.html

https://forum.ih8mud.com/60-series-wagons/14641-im-getting-new-tires.html

https://forum.ih8mud.com/60-series-wagons/27305-so-what-kind-tires-you-guys-running.html

There you go little buddy!
These links are what yer lookin fer!

 

[Rigger]

There you go little buddy!

 

[krall shumavi]

Gorilla I.m with You
When I wanted fancy up my I had to go thru same thing
a: there is not whole pictures
b: usualy wheel size is missing
So here is my picture 2.5 heavy OME with no weight yet
Front 235/75/15 on stock wheels
Rear 33/12.5/ on 10.5x15 with 2.5 backspace

 

[Ducks]

Here is a pic from my Alaska Trek. I have a 5" lift but I am fully loaded down for three weeks worth of expedition. 35"x12.5" Mickey Thompson Baja Claws for tires. 2.5" Backspacing on the 15x8 wheels. I still rub so I am going to put on a 1" body lift and extend my bumpstops.

 

[NQCruiser]

Allied Wheels "LockJaw" in 16x8 (not sure of offset) with Cooper STT 285/75R16. The rim is a fake beadlock. If I had to do it over I would have tried to get some of the Rockcrawler ones with the proper steel ring welded in. These still look OK up to about 4 ft away though.

 

[landcruiserjunky]

35" Yokohama MTs with 16" wheels. Check out my build thread in my sig if you want eye candy

 

[wengejor]

these wheels would look rockin on my rabbit.

Yeah I check that pretty much everyday and have gone through every pags, but most owners dont post their wheel size. Reason i ask i want to get wheels..(Before i have the truck haha) from Japan something like this

I have always wanted a 60. I sold my 80 series recently, and figured a 40 will be too much work, and the 70's are all 2 door so i think im set on a 60. just waiting for a nice one to come up and 12HT!

 

[gothodgie]

q78/35's bias Buckshots on 15 x 8 wagon wheels... OME lift, 1.5" whels spacers on the front...

 

[nightcrawler]

Yeah I check that pretty much everyday and have gone through every pags, but most owners dont post their wheel size. Reason i ask i want to get wheels..(Before i have the truck haha) from Japan something like this

I have always wanted a 60. I sold my 80 series recently, and figured a 40 will be too much work, and the 70's are all 2 door so i think im set on a 60. just waiting for a nice one to come up and 12HT!

It'll look unique on a 60 but I think the center section will look better painted in black instead of white.

 

[BIG PETE]

heres mine
Wheels:alloy rims
Diameter and width: 15x14
Offset:very deep
Tyre Size 39.5x18 boggers
Lift Height heaps
Pics:

 

[2mbb]

33x12.5x15 BFG AT on 15x8 rims with 3.5" backspace. OME heavy leaf springs.

 

[sk8salomon]

q78/35's bias Buckshots on 15 x 8 wagon wheels... OME lift, 1.5" whels spacers on the front...

i've been looking everywhere for those tires, the original gateway buckshots. company went out of biz, sold dies to another company, then send dies to S.America for a production run...or that's the story i'm getting. Could be 6 months to year before they are available again. sux!