Pig won't turn over

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 2, 2012
Threads
6
Messages
21
Location
Redlands CA
My beast has had no other previous starting issues. Pulled up to work, forgot to roll up rear window reached in went to turn the key just to roll up the window and accidentally turned the key too far. Pig made sound like it was gonna start, but clutch wasn't in so it obviously didn't. After that the window wouldn't roll up from the dash control. It will come down but not roll up. Also, the engine won't even turn over. Ugggghhh. I can't see any loose wires from ignition to starter. Battery is charged. Is there any kind of fuse for the ignition or a relay that could have tripped? Opinions?
 
Last edited:
check all the grounds first. next check the ammeter wiring behind gauge. most likely bad ground or loose wire. could be a bad switch(key). Have you tried to jump the solenoid with truck in neutral?
 
LAMBCRUSHER said:
check all the grounds first. next check the ammeter wiring behind gauge. most likely bad ground or loose wire. could be a bad switch(key). Have you tried to jump the solenoid with truck in neutral?

No I haven't tried to jump solenoid how do you do it? I'll start checking grounds. I was able to start it by popping the clutch.

Sent from my iPhone using IH8MUD
 

Users who are viewing this thread

Back
Top Bottom