Wanted Parts needed...FJ40 - FJ45LV

treerootCO

Where are my keys?!
SILVER Star
 
Joined
Jun 2, 2004
Messages
3,786
Location
Wheat Ridge CO
Let me know if you have any of these parts. I'll have pics up shortly.

  • '79 and up tube style tire carier for an FJ40.
  • '79 and up rear floor patch panel.
  • Large sight glass carb
  • F135 engine block (I now need one, I bet Wes is still laughing)
  • older style hub caps
  • full frame front license plate holder
 
Last edited:

wesintl

 
 
Joined
Mar 14, 2003
Messages
4,522
Location
Between Here and There
treerootCO said:
Let me know if you have any of these parts. I'll have pics up shortly.

  • 1964 or so lower bifold door section without the custom window
  • hinge portion that bolts to the hardtop for the bifold door
  • the latch that holds up the bifold door (clips inside the rain gutter when not in use)


  • Thanks.. You need to head the junk yard tomorrow.. are you workin?
 

Poser

Oh...Durka Durka Durka.
s-Moderator
Supporting Vendor
 
 
Joined
Oct 1, 2003
Messages
20,187
Location
MN
Pretty sure that I have at least two, if not three 135 engines..


come and get 'em mike.


might even have a carb....I will look around.
 

Living in the Past

SILVER Star
 
Joined
Apr 21, 2005
Messages
16,639
If someone closer doesn't have the any of the bifold door and parts I have a couple here in Phoenix. Not sure what your looking for but I have a few of the early hard, plus parts.

John
 

treerootCO

Where are my keys?!
SILVER Star
 
Joined
Jun 2, 2004
Messages
3,786
Location
Wheat Ridge CO
There is bifold door in a local junkyard. I am going down there tomorrow to see if it is still there. I need the lower portion uncut (no window), the passenger side pivot, and the hook that holds it up.

I stole the license plate holder pic from Cruiser Nerd :) :
40plate.JPG
 

Living in the Past

SILVER Star
 
Joined
Apr 21, 2005
Messages
16,639
I seen that license plate bracket before. That's the one I loaned to Jim. At one time I think he was going to try and make one. Then decided it was easier to post a picture of it to see if anyone had one for sale (like you're doing). I been pretty lucky over the years in finding a couple of these which is funny since here in AZ we haven't had front license plates for years. Even when we did seems most people here weren't using them anyway.

Let me know if you need any door parts, I was moving stuff around this last weekend and found that I have five of the bifold doors. If you check out the hard top I am looking for the vent that goes on the roof. The small one in the back.

John
 

treerootCO

Where are my keys?!
SILVER Star
 
Joined
Jun 2, 2004
Messages
3,786
Location
Wheat Ridge CO
Some pics of the parts. The hook that holds up the bifold rear is missing on the passenger side. I am not sure if the parts are the same on both sides.
hook.jpg
earlyhub.jpg
centercut.jpg
 

treerootCO

Where are my keys?!
SILVER Star
 
Joined
Jun 2, 2004
Messages
3,786
Location
Wheat Ridge CO
This is the large siteglass carb. Whole or parts...

and Poser....I will make it up there one of these days. You can count on it.
large.jpg
earlyplate.jpg
 
Last edited:
Joined
Jan 20, 2003
Messages
11,195
Location
Wherever the truck stops!!
Looks cold there Mike!! What years did the large sight glass carb come on? The hatch stays are not for an LV right? It sure didn't look like one to me.

I'm going to print the picture of the front hub caps for when I go downtown next time since I don't have a sample to show.
 

treerootCO

Where are my keys?!
SILVER Star
 
Joined
Jun 2, 2004
Messages
3,786
Location
Wheat Ridge CO
the hatch stayes are Fj40.

All LVs as far as I can tell were large sight glass carbs. The odd part is none of mine are blue. They have a grey background. My 66 is a large site glass but it doesn't have the Aisin plate behind the glass. The fuel level line is cast into the carb body. I think 1958-1967 had the large window. 68-69 or so the large sight style carb had a small round window.
 

Cruiser_Nerd

That 25 Guy.
Moderator
 
 
 
Joined
Dec 3, 2002
Messages
4,261
Location
Higganum.
That license plate frame was used to the late 70's there has to be a billion of them out there. :D

The junkyard I picked up the '62 at on Friday had one, it was flattened out and bolted to the bib, but otherwise good. Send you his addy if you want.
 

treerootCO

Where are my keys?!
SILVER Star
 
Joined
Jun 2, 2004
Messages
3,786
Location
Wheat Ridge CO
Does anyone have a '79 and up style rear tire carrier for an FJ40 they don't need anymore? :)
 

nuclearlemon

not an addict
Moderator
 
 
Joined
Jan 30, 2003
Messages
16,128
Location
meh-ico, colorado
Cruiser_Nerd said:
That license plate frame was used to the late 70's there has to be a billion of them out there. :D

The junkyard I picked up the '62 at on Friday had one, it was flattened out and bolted to the bib, but otherwise good. Send you his addy if you want.
not many of them out there. and if you do find them, they're snapped off likek the first pic.
 
Top Bottom