Parting out 95 FZJ80 Engine/Transmission

[warpdriv]

Hi Everyone,

I'm parting out my engine and transmission. They have 170k on them. For those that don't know, the PHH blew out and the engine over heated and is not good. There's a lot of good parts. Plugs, wires, D-cap, rotor have about 20k on them. Tranny is solid.

Make offer on what you want. If you need it shipped, include the cost of the ride.

I'll be post this up in the part-out section in a couple of weeks.

Call me if you have any questions between 9am - 7pm CST.

Thank you for shopping Jeff's Land Cruiser Parts Emporium.

 

[Sea Knight]

Hi Everyone,

I'm parting out my engine and transmission. They have 170k on them. For those that don't know, the PHH blew out and the engine over heated and is not good. There's a lot of good parts. Plugs, wires, D-cap, rotor have about 20k on them. Tranny is solid.

Make offer on what you want. If you need it shipped, include the cost of the ride.

I'll be post this up in the part-out section in a couple of weeks.

Call me if you have any questions between 9am - 7pm CST.

Thank you for shopping Jeff's Land Cruiser Parts Emporium.

Jeff, is (isn't) the exhaust plumbing the same for '95-97 80's? If yes, are you selling the exhaust components as well?

I'm out of town almost continuously until 12 July, but could pick up the junk after that, if you're selling.

Thanks,
Lee

 

[Michael Hanson]

Jeff, Sorry to hear your engine is gone.Hasn,t been a good June for either of us. Mike

 

[warpdriv]

Jeff, is (isn't) the exhaust plumbing the same for '95-97 80's? If yes, are you selling the exhaust components as well?

I'm out of town almost continuously until 12 July, but could pick up the junk after that, if you're selling.

Thanks,
Lee

Lee, i'm sure about O2 sensors. They are a couple of months old. The cats are not any good. Other than a small ding in the pipe where it goes under the frame, its all good.

Jeff, Sorry to hear your engine is gone.Hasn,t been a good June for either of us. Mike

Hey Mike, yea, it's been a bitch of a month. Glad your family walked away from that one.

 

[Sea Knight]

Lee, i'm sure about O2 sensors. They are a couple of months old. The cats are not any good. Other than a small ding in the pipe where it goes under the frame, its all good.

All my phone numbers were stored in the phone that was stolen. PM your number to me and I'll call before leaving town Thursday. I can source aftermarket cats. What I really need is unrusted pipes. I'll confirm with Hocker that '95-'97 80 series plumbing is the same.

Thnx,
Lee

 

[davegonz]

They should work, Lee. The big difference was the cat setup with the 93-94's.

 

[tucker74]

Soooo - whatcha gonna do with her now man? I heard your wife say you can't get rid of the truck

Tucker

 

[warpdriv]

Soooo - whatcha gonna do with her now man? I heard your wife say you can't get rid of the truck

Tucker

As of today, , Vortec 5.3/4l60/Late model FJ60 case. It's going to be an interesting journey.

 

[tucker74]

Nice - I'll take the engine harness (top of engine to ECU) if you've still got it. Let me know what you want for it -

Tucker

 

[warpdriv]

Nice - I'll take the engine harness (top of engine to ECU) if you've still got it. Let me know what you want for it -

Tucker

Please hit me up for it after I'm done. I shouldn't need any of it, but the electronics portion of this is uncharted territory for me. Therefore I may need something.

 

[tucker74]

Please hit me up for it after I'm done. I shouldn't need any of it, but the electronics portion of this is uncharted territory for me. Therefore I may need something.

Sure, just let me know if you've still got it intact after. Figured you'd need the rest of the harness, this one is just engine electronics



Tucker

 

[warpdriv]

That's what figured too. I'm not cutting anything electronic to pull this.

 

[cool breeze]

How about this little guy?
03 V8 VORTEC motor and tranny

 

[warpdriv]

Thank you for the lead. But, I found a salvage yard that includes warranties with it's engines. I talked to them today and he is looking around for me.

 

[warpdriv]

Nice - I'll take the engine harness (top of engine to ECU) if you've still got it. Let me know what you want for it -

Tucker

Pulling the drive train tomorrow. If you want to come by and get harness let me know.

 

[AustinCruiser]

Parts?

How much for your D cap, rotor and wires? I'm also looking for a couple of small bolts (one for the plastic spark plug trim and one for my EGR valve.

Thanks, Ed

 

[warpdriv]

How much for your D cap, rotor and wires? I'm also looking for a couple of small bolts (one for the plastic spark plug trim and one for my EGR valve.

Thanks, Ed

How does $50 sound? You can come out and pull the bolts you need to make sure you get the correct ones. Just call me 431-8071 and let me know.