Parting Out Parting Out: 1989 FJ62

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Stumpalama

Stumpalama

Forum Junkie
SILVER Star
10 Year 15 Year 20 Year
Joined
Nov 5, 2004
Threads
529
Messages
9,860
Location
NOVA
Website
www.capitallandcruiserclub.org
Location
United States
Bought an FJ62 for a 2FE swap. It has approximately [STRIKE]160,xxx[/STRIKE] EDIT: 248K on the ODO.

PO gutted it from 99% of the interior goodies, but here is a list of what's available, pics on request:


Body/Engine bay
3FE block, ran fine $100
Air pump $30
Power steering pump $40
Alternator $30
Air cleaner housing. a little rough, no rust through. PENDING
Radiator, unknown condition $free
[STRIKE]front bumper OK, end-cap mounts rusted [/STRIKE] GONE


Interior:
Front heater assembly $25
A/C and heater dash controls $20
various switches, ask for it and I'll look $5 each
heat and A/C ventilation hoses $10 for all
Blower motor $20
Rear heater assembly $20
Steering column $40
Speedometer $25
Quad gauge (minus oil pressure gauge) $30
Tach $20
Headliner: good shape, no tears or stains $20
All glass (except windshield) $10 each
Rear body electrical harness $20
Rear washer bag and motor $25
Elect lock motors $10 each
Front window regulators and motorassembly $20 each
Front wiper motor $20
Rear wiper motor $20


Driveline/Fuel:
Fuel tank $25
Transmission $100
T-case $100
Skidplate $25
Rear driveshaft $50
RR axle complete hub to hub $200
Front axle housing minus 3rd and brakes/knuckles $50
Birfs and axles. In fine shape, knuckles were well greased, no rust. $100/pair
OEM Shackles. front and rear $25 for all 4
Rims/Tires tires almost new, lots of tread, stock chrome rims in very good shape $25 each/ $100 for all 5.

Prices are OBO, (make me an offer) plus shipping. Parts are still on the truck, so it will take a few days to harvest and ship.

PM me if interested.

Cheers,
Stump
 
Last edited:
Stumpalama said:
Bought an FJ62 for a 2FE swap. It has approximately 160,xxx on the ODO PO gutted it from 99% of the interior goodies, but here is a list of what's available, pics on request: Body/Engine bay 3FE block, ran fine $100 Alternator $30 Front grill $30 Air cleaner housing. a little rough, no rust through. $free Radiator, unknown condition $free front bumper OK, end-cap mounts rusted $free Interior: Front heater assembly $25 A/C and heater dash controls $20 various switches, ask for it and I'll look $5 each heat and A/C ventilation hoses $10 for all Blower motor $20 Rear heater assembly $20 Steering column $40 Power steering pump $40 Speedometer $25 Quad gauge (minus oil pressure gauge) $30 Tach $20 Headliner: good shape, no tears or stains $20 All glass (except windshield) $10 each Rear body electrical harness $20 Rear washer bag and motor $25 Elect lock motors $10 each Front window regulators and motorassembly $20 each Front wiper motor $20 Rear wiper motor $20 Driveline/Fuel: Fuel tank $25 Transmission $100 T-case $100 Skidplate $25 Rear driveshaft $50 RR axle complete hub to hub $200 Front axle housing minus 3rd and brakes/knuckles $50 Birfs and axles. In fine shape, knuckles were well greased, no rust. $100/pair OEM Shackles. front and rear $25 for all 4 Rims/Tires tires almost new, lots of tread, stock chrome rims in very good shape $25 each/ $100 for all 5. Prices are OBO, (make me an offer) plus shipping. Parts are still on the truck, so it will take a few days to harvest and ship. PM me if interested. Cheers, Stump
Click to expand...

Do u have parts left??
 
I know this wasn't listed, but I am interested in the rear shoulder belts and associated trim. Are these available? I doubt it but if so, how much are you looking to get?

-Ken
 
steering U joint

Hi, i'm interested in the steering column knuckle (u joint) that attaches to the steering box under the hood...not sure what its called. Thx
 
Jolllly Rogers said:
Hi, i'm interested in the steering column knuckle (u joint) that attaches to the steering box under the hood...not sure what its called. Thx
Click to expand...

I know what your talking about. It is there and I'll try to pull it this weekend. Are you looking for the yoke portion that connect to the steering box, the ujoint itself or the whole lower assembly? Do you want the heat shield as well? I don't know the condition of the heat shield off the top of my head.

Based on what I've read, I am inclined to pull the whole lower assembly from where it connects to the column shaft to the steering box connection. New u-joints are $30-$40 from various retailers, if that is what you are looking for (part #: 04371-10011).

If you want the whole lower column and joint I'll say no more than $50 plus shipping depending on the condition of the joint.
I'll pull it and take some pics. Send me your e-mail address and I'll send the pics to you.

Cheers,
Stump
 
Are you referring to the plate under the radiator? I have that. I also have the transmission skid plate. Either one is $10 plus shipping.

Thank you for the holiday wishes. Happy holidays to you too.

Cheers,
Mike


jpsfj60 said:
Hi, I want the small front skid plate and the bolts that hold it on if you have it.
THanks and Happy Hoildays to YOU and your FAMILY!!
Click to expand...
 
i need the exterior drivers door handle and assembly for window on drivers side as well. seats if they are all in good condition.
 
gfrancica said:
Are the Fenders avaliable and if so what kind of condition are they in? Pics
Click to expand...

The fenders are pretty rusted and probably not worth trying to save. I'll get some pics though.

Griffin777 said:
i need the exterior drivers door handle and assembly for window on drivers side as well. seats if they are all in good condition.
Click to expand...

I have the drivers door handle, but the window regulator and motor are sold. Do you need the handle connections (rods) as well? If you need just the handle, $15 shipped should do it. PM me your shipping address and send $ via paypal to stumpalama@gmail.com

RichardsBJ said:
Hello. Would you have the AC compressor mounting bracket please. PM if so. Thank you!
Click to expand...

I need to find out if I need it to mount the A/C compressor on my 2FE or if it will even fit. I'll check and get back to you.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom