I think it is 23100A in the attached diagram, the line from the fuel filter to the fuel pump. Mine appears to have a pinhole leak in it so I should just replace all the soft lines in there just to be sure and I don't know the part number or the dimension to see if this is just an auto store run or something I should order OEM.
Part number for flexible fuel lines? OEM or just auto store it...
- Thread starter taoofbean
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jul 22, 2012
- Threads
- 581
- Messages
- 16,320
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
5/16" (8mm). Not 3/8"
My memory served me wrong!
Thanks for the clarification @cruisermatt
Thanks for the clarification @cruisermatt
- Thread starter
- #5
5/16 was the perfect size in Gates hose I picked up from a local auto shop. I ripped out all the old lines and replaced them with new just for sense of sanity. 8 feet of hose was plenty to cover the 5/16 fuel lines in the engine bay.
As it is now on my mind that all of these old hoses are likely shot or near failure at this point, I need to replace the slightly smaller diamter lines that go to the charcoal canister and am assuming 1/4 inch or 3/8inch will work for those lines.
Some day down the road I will replace all the soft lines near the gas tank in the rear but that feels like a tomorrow problem.
As it is now on my mind that all of these old hoses are likely shot or near failure at this point, I need to replace the slightly smaller diamter lines that go to the charcoal canister and am assuming 1/4 inch or 3/8inch will work for those lines.
Some day down the road I will replace all the soft lines near the gas tank in the rear but that feels like a tomorrow problem.
