Painting Advice

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

BGarcia88FJ62

SILVER Star
Joined
Dec 1, 2004
Threads
108
Messages
1,437
Location
Bryant, Alabama
Rattle can pro but a rookie painter. need some recomendations on spraying this paint on this truck. As you can see Im not going to be clear coating this rig ;) I want this stuff on thick. Im just not to sure about spraying it, Rolling it or just brushing it on. Any advice will be helpful :beer:.
2009_0614Image0080.webp
2009_0614Image0081.webp
2009_0614Image0058.webp
 
what type of advice in specific? it looks like industrial enamel. is it ready to spray, does it need reduction, & does it use a catalyst? we need more info.
 
what type of advice in specific? it looks like industrial enamel. is it ready to spray, does it need reduction, & does it use a catalyst? we need more info.

That's just it I have no Fawkin idea. I'll dig back and get in touch with the folks I got the paint from and see if they can offer up some info. Thanks for the responses :beer:.
 
there should be some mix directions on the back of the can. if not, i'd say it's ready to spray. if so, u may reduce it w/acetone a little (10%) to make it easier to spray & then just let it fly. good luck,
 
Well the folks I got the paint from gave me some instructions Im gonna run with it.

"Most of our customer thin the paint, 4 parts paint and 1 part thinner with Xylene. You can purchase Xylene at any hard-ware store. We don’t suggest using a catalyst".

Now all I got to do is plan all this out.
Thanks ya'll :beer:.
 
Hi 2 everyone>>
Could someone please advise if its possible to spray a car in lumminated colour effect I want 2 spray my cruiser red making a pic up truck and would like 2 have the effect like a reflector so that it may really stand out at night ><><> im new here and living in Botswana africa please assist><>,
many thanks
nelson
degab@global.bw
 

Users who are viewing this thread

Back
Top Bottom