ARCHIVE Owl Expedition Step Sliders (1 Viewer)
- Thread starter Ramathorn15
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
ramangain
Clarksonian disciple
Looks like the lil' Owl Expedition side hustle may not be lil' for much longer!
Just a reminder as stated previously in this thread ... OE is currently a one man show, and the owner works full time at his "career" job. Patience is a virtue; we are all thankful that OE tackles these neat upgrades, and is willing to do what he can, when he can, to support us vultures in the Hundy community.
Just a reminder as stated previously in this thread ... OE is currently a one man show, and the owner works full time at his "career" job. Patience is a virtue; we are all thankful that OE tackles these neat upgrades, and is willing to do what he can, when he can, to support us vultures in the Hundy community.
Last edited:
That is always a challenge .... as I said, not pushing however I very much like what I see and will be standing in line once the product is ready for prime time ....
I would like to take a minute here and say thank you for all this hard work on ALL of these projects..
Takes talent to be able to make these things happen ....
Talent that I do not have in this case ... LOL
JunkCrzr89
Competent Ignoramoose
ramangain
Clarksonian disciple
I nearly shorted out my monitor when I spat out my water in laughter when I saw this. Epic
- Thread starter
- #146
Hahaha you guys are great. I have both jigs built. I still need to build on for the pass side off the jig and verify its good.
Making these will hopefully be pretty streamline. It will still take time though as I am a one man show with 40 hours a week already gone with my day job. I anticipate lots of demand at first, but hopefully once I get through the majority that want them, the demand will be slow/steady.
I think my biggest obsticle is going to be freight shipping. I've received tons of freight items, but never sent any. So figuring out all those logistics will be the real time sink.
Plan is to still build a handful of sets for local customers to verify fitment on as many trucks as possible. I'm hoping to start those sets next week. After/during that, I'm going to work on figuring out how to get these shipped.
Thanks for the patience everyone. Im hopeful I'll be able to poat some "final product" photos this weekend.
Making these will hopefully be pretty streamline. It will still take time though as I am a one man show with 40 hours a week already gone with my day job. I anticipate lots of demand at first, but hopefully once I get through the majority that want them, the demand will be slow/steady.
I think my biggest obsticle is going to be freight shipping. I've received tons of freight items, but never sent any. So figuring out all those logistics will be the real time sink.
Plan is to still build a handful of sets for local customers to verify fitment on as many trucks as possible. I'm hoping to start those sets next week. After/during that, I'm going to work on figuring out how to get these shipped.
Thanks for the patience everyone. Im hopeful I'll be able to poat some "final product" photos this weekend.
Awesome! Thank you again for all the extra efforts
- Thread starter
- #148
Good news. Passenger side jig lined up perfect too.
I'm going to have to reduce the bolts on the feet to 3/8 from 1/2 to create a bit more clearance for the body. That shouldn't affect the strength though as those bolts are only under strain from downward forces. So essentially they just hold your weight which is plenty.
I'm going to have to reduce the bolts on the feet to 3/8 from 1/2 to create a bit more clearance for the body. That shouldn't affect the strength though as those bolts are only under strain from downward forces. So essentially they just hold your weight which is plenty.
Dang, I might have to try and sell my OPOR sliders to get these. I really like how they look.
Ready to buy for my 98 LC when ready.
Been following the progress. These are great. Also, add me to the list when available for purchase.
Looks great and very functional. Would like to be added to the buy list when they become available. Thanks!
ramangain
Clarksonian disciple
@Mauser @Ramathorn15 you guys should get together and chat about welding (labor assistance) to potentially speed up initial production. I suspect you two may also team up on other ideas/products for OE. As I was once told, always find a way to find that magic to make a team greater than the sum of the parts of the team.
Been watching. Much like Ben with Dissent, Rami, you are true craftsman developing a product that majority of owners want. Despite being on the east coast, I want a set/in for a group buy. If I have to, I will drive out to pick up a set in person.
ramangain
Clarksonian disciple
One word: damn
I'm definitely interested in a set as well!
- Thread starter
- #157
Hoping to get a few "production" units done this weekend. They're all going to local trucks to verify they fit the same as on my truck. Hit a snag last weekend that delayed me quite a bit (broken tools 
)
Hopefully I'll have some good photos of the final design by Sunday.
) Hopefully I'll have some good photos of the final design by Sunday.
Really excited to see more pics! Hopefully all the local production sliders will work with no fitment issues. Great work!Hoping to get a few "production" units done this weekend. They're all going to local trucks to verify they fit the same as on my truck. Hit a snag last weekend that delayed me quite a bit (broken tools
Hopefully I'll have some good photos of the final design by Sunday.
Wow.... sorry about the snag however awesome news about production possibilities ....Hoping to get a few "production" units done this weekend. They're all going to local trucks to verify they fit the same as on my truck. Hit a snag last weekend that delayed me quite a bit (broken tools
Hopefully I'll have some good photos of the final design by Sunday.
Thanks again for all the efforts and hard work
- Thread starter
- #160
Super disappointed in the LX tube lights. They're so dim!!
Was so excited that I managed to make them work, until I hit the button.
Going to scrap that idea.
Was so excited that I managed to make them work, until I hit the button.
Going to scrap that idea.
