Oil pressure sensor (15 Viewers)

[ptotheo]

Hello!

so i have some issues with my oil pressure senssor, and dont really have the time to fix the original one ( some wire issues ) in the maintime i just want to add another oilpressure sensor, but whats the name of the thread going in to the block? Bsp? and is it a 8mm? i need a conversion from one thread to another

 

[NeverFinis]

I don't know, but I believe the small harness and the oil pressure sender is still available from Toyota. I personally would just go for that.

1/8 BSPT.

 

[ptotheo]

I don't know, but I believe the small harness and the oil pressure sender is still available from Toyota. I personally would just go for that.

1/8 BSPT.

Yeah I bought a new one, and changed it, but it probably some wiring fault somewhere, maby I’ll just research how to check for the wire failure

 

[Malleus]

Yeah I bought a new one, and changed it, but it probably some wiring fault somewhere, maby I’ll just research how to check for the wire failure

Broken wires at the sensor connector housing is a common failure; look over the pigtail from the connection to the main harness through to the sensor end. It is obvious if that's the problem.