Official ONSC member buying/selling thread (9 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
lumbee1
Native American
Don't waste your time. Two of the tires look like they have 20k on them. He said $700 was his bottom dollar. I walked away from them. They also had a lot more abuse than what he was stating. The tread blocks had enough damage on the outside I expected to see holes or cracks on the inside. Classic BS'er with no clue.
Used tire sellers and prices have been ridiculous on Craigslist lately.
I've been trying to sell my worn 255/85/16 km2s for $175 for months. Nothing but lowballers, no shows or jerks. I know they are worn but at least I'm honest and forthcoming with pics.
I've been trying to sell my worn 255/85/16 km2s for $175 for months. Nothing but lowballers, no shows or jerks. I know they are worn but at least I'm honest and forthcoming with pics.
Getting ready to move again and thinning down on my stuff:
Armstrong USMC GMTK Like New and complete. Retails $3500+ will sell for $2000 Possibly the best off road tool kit ever.
http://www.armstrongtools.com/armstrong-sgmtk2-general-mechanics-tool-kit-us-marine-corps.html
Snap-On All Weather Tool Box, like new, retails for $750 sell for $500
Tool Chest, All Weather, 8 Drawers, Black
Snap-On Blue Point General Service Set - like new, retails for $432 sell for $330
Proxxon 23650 40-Piece Automotive and Universal Tool Set retails for $315 plus shipping will sell for $250 - All Metric
Two Snap-On KRL's $3500 for the big one and $3000 for the smaller one - they are keyed alike comes with 2 keys. Excellent Condition.
Power Probe 3 - new $100
Pit Pall Wall Cabinet $150 $199 new
Trailer Cabinet l Door Cabinet l Racing Cabinet l Garage Cabinet
Have Pitpal Glove and paper towel holders and a few other things as well.
Armstrong USMC GMTK Like New and complete. Retails $3500+ will sell for $2000 Possibly the best off road tool kit ever.
http://www.armstrongtools.com/armstrong-sgmtk2-general-mechanics-tool-kit-us-marine-corps.html
Snap-On All Weather Tool Box, like new, retails for $750 sell for $500
Tool Chest, All Weather, 8 Drawers, Black
Snap-On Blue Point General Service Set - like new, retails for $432 sell for $330
Proxxon 23650 40-Piece Automotive and Universal Tool Set retails for $315 plus shipping will sell for $250 - All Metric
Two Snap-On KRL's $3500 for the big one and $3000 for the smaller one - they are keyed alike comes with 2 keys. Excellent Condition.
Power Probe 3 - new $100
Pit Pall Wall Cabinet $150 $199 new
Trailer Cabinet l Door Cabinet l Racing Cabinet l Garage Cabinet
Have Pitpal Glove and paper towel holders and a few other things as well.
No affiliation, but thought they looked pretty good for the price.
"Toyota 15x6 OEM Chrome steel Wheels - $120 for 5"
Toyota 15x6 OEM steel chrome wheels x5
"Toyota 15x6 OEM Chrome steel Wheels - $120 for 5"
Toyota 15x6 OEM steel chrome wheels x5
NCFJ
Supporting Vendor
What a deal.
Toyota : Land Cruiser FJ62
Toyota : Land Cruiser FJ62
Why is the rear axle so far forward? I know you are laughing at the price, but I bet he has 125k in that thing (not that that makes it worth it).
R
wow that's super clean and nice.... Kinda underwhelming though for something that expensive, right?... A chevy 350 with a turbo 400 transmission? A set of "kicker" speakers?
For that price I'd expect something a little more high end on the engine and stereo selection...
I do like the roof rack though..
For that price I'd expect something a little more high end on the engine and stereo selection...
I do like the roof rack though..
NCFJ
Supporting Vendor
Ramon,
I do not doubt he has at least $80-100K in the truck, but I agree with you in that does not mean the end product will pull that much. The axle being that far forward kinda bothers me in that if the builder did not recognize this and if he is the guy that also designed the suspension geometry there may well be deeper issues.
Personally, I would think that the same body on a stock 80 frame with 3" lift with similar modifications would be a lot less in and a far bigger potential customer base. It's an overall cool truck but better built on a consignment basis for a specific customer. Perhaps it was and the customer backed out at some point, who knows.
I do not doubt he has at least $80-100K in the truck, but I agree with you in that does not mean the end product will pull that much. The axle being that far forward kinda bothers me in that if the builder did not recognize this and if he is the guy that also designed the suspension geometry there may well be deeper issues.
Personally, I would think that the same body on a stock 80 frame with 3" lift with similar modifications would be a lot less in and a far bigger potential customer base. It's an overall cool truck but better built on a consignment basis for a specific customer. Perhaps it was and the customer backed out at some point, who knows.
NCFJ
Supporting Vendor
I thought the same thing about the motor James, an E-rod would be a more current choice.
For that kind of money I would expect a top of the line Toyota Diesel fully rebuilt and a new diamond ring for my wife, cause she won't be happy with that much $$!
How about some extended rear control arms so that rear axle is back in place? Drop $400 man!
The interior, though - - WOW that is nice.
How about some extended rear control arms so that rear axle is back in place? Drop $400 man!
The interior, though - - WOW that is nice.
NCFJ
Supporting Vendor
You can put in a very nice interior for about $5K over the top for $7K or so. I like the custom dash board.
elkaholic
Left turn ...freakin wipers!
I think we once again have a definition issue with the word "restoration".
Not digging this one even for 10% of the price. Too many things appear poorly thought out ....
I'm in need of a 1F or 2F radiator if it will fit 1974 FJ 40.
elkaholic
Left turn ...freakin wipers!
David70FJ40
Older Than Most
I have one but it needs some TLC.
A carburetor? Seriously? and 22's? How's that push button start gonna look cool when you have to pump the gas pedal 10 times to get the thing to crank?
