Official ONSC member buying/selling thread (20 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

If any of you guys that have one of Luke's rear bumpers decides to part ways with one, please let me know. TIA
 
Looking for a semi-good used FJ40/55 radiator in order to bench test an engine (and let it run for any tweaking), if anyone has one let me know. Gotta get the Pig up and running before school or it'll set for another semester...
 
Brian, i got one out of an 80 your welcome to.
 
Also got the 45 rad I just pulled to go aluminum if needed. Cradle shroud and all
 
Joanna has offered one that had a pinhole leak from Brad, so I'll borrow it and assess for future sale/use for her. Win-Win!
Thanks for everyone's offer. Anyone have any used water pumps, fuel pumps, or alternators lying around for a short time loan?
 
Didn't I give you my old fuel pump Keefer? If not, I should have that. Will also check on a w/p. Definitely have a working alt you can use!

:beer: R
 
You might have, I'll have to check with my gnomes at the satellite warehouse. The gnomes at the headquarters are telling me it's out of stock!
 
Joanna has offered one that had a pinhole leak from Brad, so I'll borrow it and assess for future sale/use for her. Win-Win!
Thanks for everyone's offer. Anyone have any used water pumps, fuel pumps, or alternators lying around for a short time loan?

I shou
I have a water pump you can use. I can get it to Charlotte or maybe to Cary next Saturday. It was used as a temp on my 82, but lacked the extra hole that was for something.
Shane
 
Looking for a driver side mirror for 80 , color does not matter.
 
I shou
I have a water pump you can use. I can get it to Charlotte or maybe to Cary next Saturday. It was used as a temp on my 82, but lacked the extra hole that was for something.
Shane

That would be great Shane! I'm eventually buying new, but I'd like to verify the engine is good, before making the comittment (Not that I couldn't use the parts on another!)
 
I have a 1986 Toyota Land Cruiser FJ60, with no motor, for sale as a parts car. I have the title for it and I’m working up a price, but wanted to get the ball rolling. I’ve run out of time to complete my rebuild, and my life has changed to the point that I can no longer proceed. Here are the details:
The front knuckles have been recently rebuilt with the Marlin kit, and have zero miles on them. I’ve installed new OEM Toyota brake disks, as well as all new wheel studs during the knuckle rebuild process. I’ve also installed new sway bar end links (SOR) and have the complete 555 Tie Rod end kit and Old Man Emu steering stabilizer from Cruiser Outfitters. Please note that I have not installed the Tie Rod ends or the stabilizer; I’ve just received the parts when it became apparent that I am running out of time to complete the build.
The glass is good, as is the frame. The interior is a bit rough and there are some dents in the sheet metal, so please have a close look at the photos. The 4 speed manual transmission and transfer case is included; the drive train is there, except for the engine. There are 258,000 miles on the odometer and the sheet metal from the front has been removed to allow access to the front end; I do have the front clip quarter panels, but the right front inner and outer fenders have been dented, as is the front right side of the radiator support. Full disclosure: this is a parts truck, with a brand new knuckle rebuild, sway bar end links, steering stabilizers, tie rod ends, and brake rotors.
The FJ60 is in Charlotte, NC, and must be picked up from my storage warehouse, so please bring whatever special tools you need to do that. It is a “roller” but please remember that neither the Tie Rods nor the steering stabilizers are installed. I’ve tried to be as comprehensive as possible, but please PM me if you have any specific questions.

Thanks

Don

front.jpg


LeftKnuckle.jpg


LeftRearQpanelDamage.jpg


TieRodEndKit.jpg


RightKnuckle.jpg
 
My BIL John put his 2005 Fleetwood pop up for sale today. Everything works except he has not been able to get refrigerator going since it's gas, but said it works. It has a queen bed and full size on the other side. The table should lower and make a small bed. He's the 2nd owner and title in hand. Call him at 7zero455zero745five. $5500 OBO

ImageUploadedByIH8MUD Forum1403787307.190165.jpg
]
ImageUploadedByIH8MUD Forum1403787335.688727.jpg
ImageUploadedByIH8MUD Forum1403787360.788617.jpg
ImageUploadedByIH8MUD Forum1403787395.255236.jpg


ImageUploadedByIH8MUD Forum1403787307.190165.jpg
 

Attachments

  • ImageUploadedByIH8MUD Forum1403787893.143766.jpg
    ImageUploadedByIH8MUD Forum1403787893.143766.jpg
    81.2 KB · Views: 124
Not what I was planning for or what I wanted to do but..I have a 1989 FJ62 for sale. It has 179k miles and runs great, no rust and in original condition. Last Thursday the transmission gave out and I cannot afford to fix or have the time to have another project so I must sell it. Interior is in great shape, just had the drivers seat and passenger door panel redone. It has new catalytic converter & exhaust, new water pump and several Toyota factory lenses. Has 31x10.5 BF Goodwrench tires in great condition. Has dealer installed cruise control (have not figured out how to make work) Air condition blows cold, roof rack with 4 lights. I have factory manual, original tool kit, all still in truck. Only real bad issues is that factory clear coat is peeling from hood and roof. Not sure what is a fair price so I am open to offers.
IMG_0221.jpg
 
Last edited:
I'd be interested in a price myself
 
ImageUploadedByTapatalk1403873945.152740.jpg
spotted this at Shelby u pull it if any ones interested in parts .
ImageUploadedByTapatalk1403874054.413128.jpg
 

Users who are viewing this thread

Back
Top Bottom