Official ONSC member buying/selling thread (15 Viewers)

[GLTHFJ60]

Lots of post-4BT swap parts for sale. All prices are listed without shipping.

[STRIKE]Custom FJ60 exhaust[/STRIKE] - SOLD!!

[STRIKE]Man-a-fre 2F 6-to-1 Header[/STRIKE] - SOLD!!

[STRIKE]FJ60 Full Floating Axle[/STRIKE] - SOLD!!

Various 1987 2F Parts - The only thing I want to keep is the bare block, everything else goes
- various brackets
- oil pan
- side cover
$ - Make me an offer

BRAND NEW FJ40 Bushwacker Fender Flares - $100 to current ONSC Members
- SOLD on ebay, pending payment:

http://www.ebay.com/itm/111077881460?ssPageName=STRK:MESOX:IT&_trksid=p3984.m1559.l2649


Saginaw PS Pumps
- one brand new pump w/o pulley or reservoir - $40

NP203 Gear Reduction Box
- perfect for using as a doubler between your transmission and transfer case.
$50

Picture album:
https://picasaweb.google.com/108958...&authkey=Gv1sRgCIDvs5ea68GiFQ&feat=directlink

( Yes, that is a rust free 2F oil cooler ):

That's a 1995 V6 4Runner master cylinder ( bolt-in upgrade for 60 series cruisers and others ):

Get some of this stuff out of my garage! If it's not listed here but it came on an '87 2F, ask and I just may have it!

Updated above with recent sales. Make me offers!!

 

[1974FJ]

1978 FJ40 front axle:

This is the SOA I have under my diesel 40. I'm building a custom FJ60 front axle to replace it.

It's a 1978 disc brake axle. The brakes are fairly new with marginal wear, I haven't driven it much since my 40 restoration.

Housing is a cut and turned housing, I so not recall what degrees the knuckle balls were rotated.

4x4 Labs "Frombe" high steer kit. Kit is for the 1978 small knuckle arm stud knuckles.

Knuckle balls are clearanced for larger "mini truck" birfields. The short side is Longfield 30 spline inner shaft and birfield. Long side is Longfield's heat treated series "stock mini truck" birfield but it is not covered under warranty because the birfield was grounded on to give extra clearance within the knuckle ball (previous owner did that). Long side axle shaft is a Longfield shaft.

Fine spline front pinion with lock-rite locker. Locker was bought new a few years ago and has less than 10 wheeling trips on it.

Axle is currently under my truck waiting on a buyer. Asking $1000 OBO. Make me an offer!

I'll even throw in the used gear oil for FREE!!! Haha

 

[Rice]

1994 fzj80 on cl for cheap

Dont know the story but looks like could be a deal. $2500. Northern VA.

http://fredericksburg.craigslist.org/cto/3802716564.html

 

[mtweller]

~2G (7.5qt or so) of Rotella T 15-140 Dino

Bought this for my 2FE then with the collective wisdom of ONSCers, decided to drain it for a non-detergent oil for initial breakin. $30 or so worth of oil, just buy me a couple of 4 packs of Green Flash West Coast IPA and it's yours

R

http://www.autozone.com/autozone/ac...-40-1-gal/_/N-26qq?itemIdentifier=690222_0_0_

 

[GLTHFJ60]

Bought this for my 2FE then with the collective wisdom of ONSCers, decided to drain it for a non-detergent oil for initial breakin. $30 or so worth of oil, just buy me a couple of 4 packs of Green Flash West Coast IPA and it's yours

R

http://www.autozone.com/autozone/ac...-40-1-gal/_/N-26qq?itemIdentifier=690222_0_0_

Done.

 

[Burt88]

I need lock out hubs for Burt. Preferably aisin.

 

[little_joe]

I'm also looking for 95-97 80 Series running boards, if anyone has them in the Triangle and wants to let them go for free or next to nothing, pls let me know.

 

[NCFJ]

All came from 1989 FJ62 3FE

$50.00 each, 2 for $75.00, $200 for all 6

PM if interested

 

[Mtbcoach]

I'm also looking for 95-97 80 Series running boards, if anyone has them in the Triangle and wants to let them go for free or next to nothing, pls let me know.

I've got some, not pretty but free...

 

[NCFJ]

91 or 92 FJ80 Trans and T-case

Make offer, PMs please

 

[S4Cruiser]

Bought this for my 2FE then with the collective wisdom of ONSCers, decided to drain it for a non-detergent oil for initial breakin. $30 or so worth of oil, just buy me a couple of 4 packs of Green Flash West Coast IPA and it's yours

R

http://www.autozone.com/autozone/ac...-40-1-gal/_/N-26qq?itemIdentifier=690222_0_0_

Why not run in the duramax? Has worked good for me.

 

[kulangot]

Ramon,

Keep the Rotella for after the break in...

-Stumbaugh

 

[lt1fire]

Ramon,

Keep the Rotella for after the break in...

-Stumbaugh

Agreed, Rotella, Delo, Delvac are all very good oils for both diesels and cruisers and dirty cheap at wally world to boot

 

[mtweller]

I may run it a few changes from now. But I run syn rotella in the duramax. Johnny's going to take thus and get it out if my garage.

 

[erymer]

Master Pull $75 gift card that I won at Logan's Run. Don't really have anything I need that badly so $35 obo takes it and will mail it to you. thanks.


*****Sold*****

 

[Burt88]

I'm heading to see a guy in Charleston for fj60 stuff. He parted out most of it but still has a bunch of stuff. I'm getting all original seats for mine and possibly hubs. If anybody wants to tag along or needs me to look for anything in particular let me know. Going Fri afternoon

 

[GLTHFJ60]

Does anyone have a set of 4Runner SR5 seats for sale? Looking to move to hinged seats as opposed to my current non-hinged suspension seats.

 

[custyota]

Mike there is a Hundy in the charleston area that is decked out go buy it for me!

 

[Burt88]

Haha....no

 

[angerhater]

ok ...not cruiser stuff but I have NEW pre hung exterior steel door 36' x 96"? its taller than normal and will be going to habitat this week, also a fiberglass slop sink with legs...some dark brown base cabinets....any interests?