Official ONSC member buying/selling thread (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Dont have one, unfortunately. If you do rent from sunbelt...go Friday and then you have all weekend for just one day rental...unless they put an hour limit per the meter. You probably already knew that tho!


When I rent equipment I usually pick up on friday and drop off on monday. I usually end up getting 16 engine hours for the weekend. Johnny, I can tell you from experience that it is pretty hard to get 16 engine hours. So you can totally do what you need done in a long weekend.

One of the last times I rented a bucket loader I pulled 30 tree stumps out of the ground. And leveled my whole backyard.
 
What color is your interior? If it's brown, I might be willing to split a kit with you. I need the cargo area and tailgate carpet for mine.
Sorry. Blue
 
i'm always on the lookout for a good 4x4 van.... but damn they are $$$$

I've always wanted a chevy/gmc 3500 series van with a quigley conversion. Per quigley, their 4x4 conversion does not lessen the towing capacity by much if at all.

Money for sure, but with their decent tow rating (10k for the 2018 CV with the 6 liter gas engine) it could be a sweet setup! They offered the 6.6 Duramax years ago and used examples can be found with low miles (sub 50k) for the 20ks. I think the GCVWR of the Duramax equipped ones are like 18k. Not too shabby for a van.
 
I've always wanted a chevy/gmc 3500 series van with a quigley conversion. Per quigley, their 4x4 conversion does not lessen the towing capacity by much if at all.

Money for sure, but with their decent tow rating (10k for the 2018 CV with the 6 liter gas engine) it could be a sweet setup! They offered the 6.6 Duramax years ago and used examples can be found with low miles (sub 50k) for the 20ks. I think the GCVWR of the Duramax equipped ones are like 18k. Not too shabby for a van.


4x4 Dmax vans are the bee's knees but much rarer than pstrokes so they are even more money.... I've seen one before with a manual and it was awesome. I wonder if it is any easier doing the injector job on a LB7 dmax after taking the dog house off :hmm:
 
Free or it’s going to the dump.

60 series rear bumper.
CDDF58A6-35C5-45F8-A9C2-FF6C674461DA.webp
 
Anyone have or know of a set on 35"-37" mud tires for sale? Need to fit a 16-17" rim.
 
Anyone haveor know of a set on 35"-37" mud tires for sale?

A bit over a grand for a set, but they'd be brand new with warranty.

XSAM-26 TSL BIAS 36X12.50-15 12 $218.00.

The Blem List | Interco Tire

Other than that:

37" Falken MTs

These are a really good deal, but you'd need to weld in beadlocks to be able to air down. 16.5" steelies don't have a safety bead, so they pop beads really easy without beadlocks.

37x12.50R16.5 Goodyear MTR on 6 x 5.5 black steel wheels
 
Looks like a 40 series bumper
Yeah, the 4 bolts certainly made me think the same thing. Doesn't have mounting points installed for a 60, but it was given to me as a 60 bumper.
 
I have a table just like that with original top. The top on the table you posted is not original. Great price just for the hardware. I've had mine 35 years.
 
thanks johnny. trying to stay away from 15" (brake rotor interference).
 
I've always wanted a chevy/gmc 3500 series van with a quigley conversion. Per quigley, their 4x4 conversion does not lessen the towing capacity by much if at all.

Money for sure, but with their decent tow rating (10k for the 2018 CV with the 6 liter gas engine) it could be a sweet setup! They offered the 6.6 Duramax years ago and used examples can be found with low miles (sub 50k) for the 20ks. I think the GCVWR of the Duramax equipped ones are like 18k. Not too shabby for a van.

Ta dah

2017 Chevrolet Express 3500 LT 4X4 12 Passenger Van---11K Miles
 
A bit over a grand for a set, but they'd be brand new with warranty.

XSAM-26 TSL BIAS 36X12.50-15 12 $218.00.

The Blem List | Interco Tire

Other than that:

37" Falken MTs

These are a really good deal, but you'd need to weld in beadlocks to be able to air down. 16.5" steelies don't have a safety bead, so they pop beads really easy without beadlocks.

37x12.50R16.5 Goodyear MTR on 6 x 5.5 black steel wheels



Haha. Was just eyeballing those Goodyear MTRs. Those things are heavy but they would look perfect on the mini.



Edit:
I just realized that the 37” falkens are being sold in Albemarle. I am working in the area so if anybody is interested in them and needs me to midship them just let me know.
 
Last edited:
Yeah, the 4 bolts certainly made me think the same thing. Doesn't have mounting points installed for a 60, but it was given to me as a 60 bumper.

This is the only picture of I have of it on the truck. It was directly bolted on the frame where the 4 holes are drilled through the bumper.

669ED326-6997-48C6-B65A-F4D2F244AA44.webp
 
thanks johnny. trying to stay away from 15" (brake rotor interference).

it was just an example. check out that blem site.
 
Cazy deals pop on that list. I picked up a set of Iroks years ago, decided to not use them and ended up making money on the sale based on demand.

For real. I just picked up a spare 42" tire for moonshine for 390 shipped!! Hell of a deal.
 

Users who are viewing this thread

Back
Top Bottom