Official ONSC member buying/selling thread (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Set of Five 16x8 5 spoke OEM alloys: $250 obo

Time to clear out my shed. I've got my original set of 80 series alloys stored in boxes and taking up space. They're in pretty decent shape. No real damage, just the usual wear for wheels that were used for 10+ years. As you can see in the pic I repainted the original caps on 4 of them in the past, the paint is still holding up pretty well. Also including 4 aftermarket caps I bought off ebay a few years ago.

They can be picked up about 10 minutes outside of Graham (Burlington area). PM if interested.

Just shot you a Pm on them
 
Selling my set of Dick Cepek Crusher Tires sized 285/75R16

Have 5 total tires (4) with 90% tread or less than 2k road miles and (1) Brand new (spare w/ no roadmiles)
Asking $975 or open for possible trade deal that we can work out. Im willing to throw cash back at you. (looking for factory front locked axle or maybe rear swing carrier.)

they run about $260 new on summit racing with no shipping

I just felt like going up to 315s tires so nothing is wrong with them, been trying for local buyer on craigslist but most ppl want to trade me ****. (bows, raccoon furs, magic potions etc)

Willing to meet ya half way if its reasonable.

Im currently over in the middle east/asia area right now for work and will be home in about week or so.

Tires are located in Wilmington NC.

Save yourself about 400 bucks and shoot me a pm.


http://i1233.photobucket.com/albums/ff389/obi05rp/FederalPoint-20110306-00087-1.jpg

http://i1233.photobucket.com/albums/ff389/obi05rp/FederalPoint-20110306-00085-2.jpg
 
Last edited:
I have a warn 9000 Integrated winch that needs a new home. Cable is shot. I was told that the winch works but we would need to hook it up and verify it. Not sure what this thing is worth...but not much on the floor of my garage.

Also:
100 series tow hitch
100 series stock T-bars and rear springs.
 
Fj80 rear compartment

FJ80 REAR COMPARTMENT
$75 OBO you can see the measurements in the pics
bed1.webp
bed2.webp
bed3.webp
 
Maria I am interested in the 80 compartment how fast do you need it gone, it might be a couple of weeks until I am in Durham again.
 
Steve Im heading through Raleigh once a week or so and will be heading down on the 6/15 and maybe sooner.

**Card spoken for. **
 
Last edited:
Does anyone have an 80 Series, '95-'97, radiator available for sale? I am in need of a replacement. The upper tank seal (plastic cap) has sprung a leak. Please PM or call me if you have something. Thanks
 
Does anyone have an 80 Series, '95-'97, radiator available for sale? I am in need of a replacement. The upper tank seal (plastic cap) has sprung a leak. Please PM or call me if you have something. Thanks

I have Jason's old one that needs to be repaired, If I remember the quote to weld it where the fan had cut it was cheap but it came after he had already ordered a new one.

You can have it if you want to try and fix it, It was only a few 1000 miles old if I remember.
 
Koyo specs call for an A1918 radiator for the '95-'97, but apparantly one can get an earlier C1917 radiator with brass tanks, etc, in lieu of it.

its new and cheaper than OEM and lots have had good success. Im the sucker that ordered the OEM.
Sit down. Its gonna be spendy. 485ish plus the ride. Koyo will be a couple hundred cheaper I have read.

If you go OEM the earlier and better brass radiator is actually cheaper. Order for a 93. Ask if you need a part # and I can dig out the reciept as it should be on top.
 
FJ Cruiser Demello front bumper with center hoop
Poweder coated black.
Good condition - some powder has come off passenger side recovery point.
Comes with bottle opener on driver side of bumper.

Retails for $925 plus shipping from Colorado so I'd estimate $1050 to SC. See manufacturer link HERE.

Asking $700 out the door for local pickup or MUDSHIP. Located in upstate SC (Travelers Rest and Seneca).

image.raw


image.raw


image.raw


xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Bent Up sliders which appear to now be out of business (website doesn't work).
These have seen some good use but are still ready to take more of a beating.
Originally powder coated black. I've repainted them once.
They could use another repaint.

From what I can find they retailed for around $450 ($325 bare + $125 for powder) + shipping additional to to SC I'd estimate $500.

Asking $175 firm out the door for local pickup or MUDSHIP. Located in upstate SC (Travelers Rest and Seneca).

Please see pictures above. I can take better pics if needed.

HERE is a link to the blue forum discussing these sliders.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Also have a set of used FJ Cruiser rear lift springs - mediums. I thought these were OME's but appear to be a custom spring??? They worked great for me until I put too much junk in my trunk (tools, CO2, rack, awning, RTT...) and I upgraded to heavy OME's.

$50 local pickup or MUDSHIP. Located in upstate SC (Travelers Rest and Seneca).

Springs for sale are on the left. New heavies installed are on the right.
image.raw
 
Cleaning out Garage This Weekend

If anyone is going to be in the Elon area this weekend, I have some Land Cruiser stuff that I am willing to give away if you pick it up this weekend. Also, its an all or nothing..... no picking and choosing. I've been meaning to list all of this stuff for sale for quite some time and just never have gotten around to it. My procrastination is your gain! Here's the list:
FJ40 Rear Tube Bumper (retail $231 - TPI4X4).
FJ40 OEM Rear Bumpers (never mounted).
FJ40 Jump Seats.
From Slee (and never installed) - OEM Center Diff Lock Switch 95-97, OEM Speedo Gear 91-97, Rear e-locker actuator guard 93-98.
2 Center Wheel Caps off of a 97 Land Cruiser.
97 Land Cruiser factory repair manual and electrical wiring diagram manual.
and, saving the best for last - a set of 5 OEM wheels and lugs off of a 97 Land Cruiser, professionally powder coated satin black at Advanced Powder Coating here in Burlington, and never installed back on the vehicle.
There you have it; see some pics below.
Ed
Bumper.webp
Jump Seats.webp
wheel.webp
 

Users who are viewing this thread

  • Back
    Top Bottom