Just picked up a new to me 03' LC with 51,000 miles. I've only put on about 40 miles but absolutely love it. The exterior has several scrapes and dings, but the interior still looks really good. Can't wait to take her off road!
Newbie just wanting to say hi..
- Thread starter rlawdawg
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Pics?
- Thread starter
- #3
To busy driving it...I'll try to take some pics in the next few days.
jonharis
Adventure Imports
Wecome to the club. and before Loud can tell you I'll say it.....wait for it.....take your running boards off. 
- Thread starter
- #5
I plan on doing that tomorrow after work! Cheap mod.. Cost about 2 beers!
03 w/ 50k! That's brand friggin new!
Wecome to the club. and before Loud can tell you I'll say it.....wait for it.....take your running boards off.
no, no no no, it's LOOSE YOUR RUNNING BOARDS!
FullyLitLED
Supporting Vendor
its spelled lose
it's "it's" not "its".
jonharis
Adventure Imports
Dawg. You will get used to plucking the valuable information out of the jumble of insults and sarcasms such as those depicted above. Don't loose or lose your running boards. Sell em!. Welcome.
FullyLitLED
Supporting Vendor
The universal answer for everything here on 'Mud.
you can only use
if it is placed after a sarcastic insult, no period is required at the end of the sentence if is used lolyou can only use
Forgive me oh lord of teh internets forum etiquette
....did I do ok there?
dont tempt me.
- Thread starter
- #19
Thanks to everyone for the warm welcome. I planned on removing the running boards and take some pics after work today but had to make my first repairs...Last night I noticed the license frame had only one screw to hold it in place. I thought when I get to work today I'd look through our shop to see if I could find a screw/bolt to replace the missing one. When I took the plate off I found the missing one was still there but had been broken off flush..So the guy at the stealership had seen this when he put the temp tag on and never said anything. I had to drill it out and re-thread it. Ended up doing both sides so the new hardware would be the same. I now have 1/4 20 screws holding the plate in place...
jonharis
Adventure Imports
You should have put on a real front bumper from "Insert Off-Road manufacturer of choice". That would have better solved your license plate problem.
