So that's why you wanted the shock bolt so quickly!
I sometimes miss my Indiana buddies....
I sometimes miss my Indiana buddies....
Newbie Intro 93 FZJ80
- Thread starter 7schulz
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
Yup. I used the rear seat belt lower bolt, (same 12mm 1.25) as an interim bolt, to drive to work and get the tires on Friday then swapped it out with the new hardwear. Thanks again Beno!
Last edited:
- Thread starter
- #24
FNP-9
Last edited:
- Thread starter
- #26
Fresh buffing to clean the pin stripes.
Yes the 35 fit, for the most part, in the spare tire area.
Yes the 35 fit, for the most part, in the spare tire area.
- Thread starter
- #27
Close up on the duratrac's for thoes who are interested.
TJ96TLC
SILVER Star
Did you put the spacers on or is that just the 2.5" medium?
- Thread starter
- #29
Just the mediums in the pics, I'm still thinking about adding the spacers or not. I don't really need the spacers so far.
TJ96TLC
SILVER Star
It looks good. I was thinking mediums with 33" at's
- Thread starter
- #31
Thanks,
The 35's look and fit right IMO but you may want to plan a re-gear.
The 35's look and fit right IMO but you may want to plan a re-gear.
Nice rig! My buddy Matt Hunter lives in Z'ville. Do you know him?
- Thread starter
- #33
No, does he have a 95-97 green 80 though? I have seen that parked on Second st. There is another guy that lives about 200 yards from me that has the exact truck I do but not lifted yet. We work on our rigs together. You should send your buddy Matt our direction.
Last edited:
No he has a couple supras, that's where I know him from. How many guys up your way? I'm looking to rebuild my front axle in the next couple months. Would love some help/advice since I'm a noob.
- Thread starter
- #35
There are a good deal of Hoosier Cruisers(IN- Hoosier Cruisers) but I had mine built by a buddy that works at the Toyota Dealer in Greenwood, IN. Didn't have time or space to tackle that mess.
What caster correction did you use when you lifted it?
- Thread starter
- #37
Nothing yet, I'm still debating putting on my MAF 30mm spacers I have. I have been swayed not to b.c I already have full articulation and to just add protection. Keep it low and light. The steering is definitly lighter and parks and trails much easier but it does have a slight wander on the highway.
- Thread starter
- #38
Slider build in progress
- Thread starter
- #39
More redneckathon
- Thread starter
- #40
One more for Redneckathon
Other uses for a Land Cruiser
Other uses for a Land Cruiser
