Need the rear panhard rod torque specs. (1 Viewer)

[njccmd2002]

So im in the middle of doing airbag instalation on a 2013 cruiser. And im ready to torque the bolts and nuts

so far ive found that the following require

Wheel 97 ft lbs

rear Sway nut connected to KDSS 74 ft lbs

rear Shocks 72 ft lbs

Rear sway bar small nuts 22 ft lbs

For the life i cannot find the panhard rod torque specs, ive been searching for the last hour, and I can find for other vehicles but the lc200

 

[bloc]

111. Same as the suspension links on the rear axle. Make sure you do all this at ride height.