Hey my family and I are going on vacation tomorrow. I was would like to take out 3rd row folding seats for more Packing Room. What I want to know is. If/When I take out the Bolts, will the Nuts just drop? Or are they embedded into the Truck? I just don't want to lose nuts. Oh yeah it's a '91 if that matters. Thanks
Need Help with 3rd Row Folding Seats (1 Viewer)
- Thread starter crappyone
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Remove the bolts and the seats just come off. I screwed the bolts back on just to make sure I did not lose them.
crappyone said:
You mean you want to remove the anchor bar thingy AND the seats? OR do you just want to remove the seats?
You can remove the seats without any tools or any kind of bolt removal AFAIK.
corbs said:You mean you want to remove the anchor bar thingy AND the seats? OR do you just want to remove the seats?
You can remove the seats without any tools or any kind of bolt removal AFAIK.
You can remove the seat without unbolting the bracket. Start by having one seat up and one down. On the down seat, unfasten the carpet cover between the seat edge and truck wall. This will expose the black steel latch. The latch has a finger tab on the front of it; squeeze it and slide the seat backwards (IIRC) and it will unlatch itself. Be sure and also disconnect the black bar running from beneath the seat over to the bracket u-bolt, it too just unsnaps. Then lift the seat up off the bracket and remove. Repeat the other side.
MoJ
Moderator
Follow the instruction posted in your cargo area. If the sticker has been removed I believe it's in the owner's manual as well. As said above, no need for bolt removal. 91 3rd row is removed in the same manner as other years.
Last edited:
