I'm finally getting around to doing the rear spring conversion, and of course am getting hung up right from the start in trying to find the shutter control valve bolts to maximize droop of the sway bar. It looks like my KDSS system is different from the one shown in the pictures of the ironman instructional I received. Doing some searching online hasn't provided any answers either to my particular set up, so am hoping someone here is familiar with the design I have and can provide some advice. I've attached pictures of the unit found on my car. My best guess is that the shutter valve bolts are the two allen head bolts on the bottom of the silver aluminum block shown in the third pic (4668.jpg). If so, just open 2 turns on these? Is this correct, or should I be looking elsewhere?
Thanks in advance for any help!
Thanks in advance for any help!
