Need a rear bumper? BIOR rear bumper group buy!

[VidereStudios]

Well, I made the decision to jump aboard on this group buy as well as the skid plate group buy.

So, for the rear bumper, I would like the bolt-on bumper with hitch, tire carrier swingout, and the second swingout with the ladder. NO powdercoating as I would like to ship it with the skidplates. Shipping is to a business with a forklift...zip code is 97402.

 

[FullyLitLED]

LJ, ready to get this going!!

Funds are ready on my end. I can try to be in touch with Mike as well Thursday...

If you would, add to my info, Right sided tire carrier swingout, left sided swingout w/o any options. I will add those later. All Powdercoated.

I spoke with Mike the other day, Pending on when everything is available I will either ship to the NW Arkansas/Tulsa area with Petrock40, or pick my bumper setup from Mike in Colorado as I will be out there last week in December/first week in Jan.

Thanks LJ

I will fix this right now!

For those wondering, Mike is gone until thursday! So if there are no responses, just want to make sure that you guys know the reason why I will discuss payment method with mike but I know for sure that if you use credit card or paypal, you will need to add 3-4% to your price because of the service fee.

Good turnout for this first group buy, looks like Mike will be busy for a while

Well, I made the decision to jump aboard on this group buy as well as the skid plate group buy.

So, for the rear bumper, I would like the bolt-on bumper with hitch, tire carrier swingout, and the second swingout with the ladder. NO powdercoating as I would like to ship it with the skidplates. Shipping is to a business with a forklift...zip code is 97402.

added


Still need one more for high clearance! Cmon guys!

 

[mpho]

Should be good to go with a bolt on model...Mike and I have been emailing back and forth...just waiting for a few more answers to questions when he returns.

 

[FullyLitLED]

Awesome, still need one more for the high clearance...no rush tho, I am sure we will get this.

See you all at surf n turf!

 

[elkaholic]

I am still on the fence on this ... but not feeling so bad about that since we appear to have more than 5 in the buy.

 

[FullyLitLED]

I am still on the fence on this ... but not feeling so bad about that since we appear to have more than 5 in the buy.

No problem, there will be another one in january and another by tax season hopefully. Maybe we can even get a slider group buy going

 

[FullyLitLED]

Bump

If you have any more questions send them my way and I can forward them over to Mike. He requested a list of all questions be sent to him through email and he will address all of them at the same time

Just a warning. Mike is requesting 50% down payment. When the product is ready to ship, he will then ask for the other 50% plus shipping. There is a service fee for credit card transactions and paypal

If you have questions outside of adding spindles, adding a swingarm without attachments and the price for shipping, do not hesitate to ask

 

[petrotk40]

I have questions, how much would a 3 Jerry can/ cooler basket cost? I don't want the ladder, just for it to connect to the swing arm. Also, is there any harm to the spindles if I remove a swing arm if I don't need it all the time?

 

[saillaw]

I'd like to know what the pice adder is for including the rear view lights in the bumper.

 

[FullyLitLED]

I will add both these questions to our "list"

 

[Blackwater]

LJ, as long as you are asking the questions...

Inquire as to the "finishing" of the bumper ends. "As in" the wheel well area. Are the new batch bumpers a finished edge or are they still open??

Hopefully you understand what im asking here, there is a thread floating around concerning this..

 

[FullyLitLED]

LJ, as long as you are asking the questions...

Inquire as to the "finishing" of the bumper ends. "As in" the wheel well area. Are the new batch bumpers a finished edge or are they still open??

Hopefully you understand what im asking here, there is a thread floating around concerning this..

Gotcha, I will forward the pics of the "finished" ends to Mike so he can price that out

 

[jhfj80]

LJ can you ask him if he knows if the bolt on model (with hitch) will interfere with fitting a borla exhaust system?

I've read they run really close to a typical trailer hitch. I assume it's fine, but gotta make sure before I buy a fellow mudder's unwanted borla.

 

[petrotk40]

LJ can you ask him if he knows if the bolt on model (with hitch) will interfere with fitting a borla exhaust system?

I've read they run really close to a typical trailer hitch. I assume it's fine, but gotta make sure before I buy a fellow mudder's unwanted borla.

the typical hitch is way lower that the BIOR bumper will be, you should be fine. Worth it to ask tho.

 

[VidereStudios]

Gotcha, I will forward the pics of the "finished" ends to Mike so he can price that out

Let me know on this as well...I would like the ends closed. If not possible, I will have my local guy do it.

 

[FullyLitLED]

Sent all questions to Mike

We are waiting to hear back regarding the spindles, swing arms, capped bumper ends, time frame for turn around, triple jerry can carrier with no ladder, and adding rear lights to the bumper

 

[Blackwater]

LJ, per the PM i sent you I am going to have to change my status to "pending" final details especially on the timeframe.

Hope you understand. Look forward to getting all the final info back from Mike!!

 

[FullyLitLED]

LJ, per the PM i sent you I am going to have to change my status to "pending" final details especially on the timeframe.

Hope you understand. Look forward to getting all the final info back from Mike!!

Understood Sorry I only noted it on my post it app lol I will edit

 

[petrotk40]

Another question, what size cooler basket does he make? What size is possible? I'd like to be able to fit a 26"x15" cooler which also = 4 jerry cans.

want to fit this http://www.engel-usa.com/index.php?...category_id=2&option=com_virtuemart&Itemid=60

 

[jemsec]

I'm very interested in a rear bumper and wonder if someone might consolidate and condence the large amount of information and requests. Sounds like he'll wind up with many different versions.
I would like one similiar to a competitors with a swing out tire carrier, room for better back up lights, hitch, powder coated and jack mount. Don't want extra high clearence. Plus second carrier arm for later mods.

Tried putting all this together, got a headache and gave up.