Need a quick measurement (1 Viewer)

[msapers]

Hi All,

Could someone give me a quick measurement from the ground to the running board on a rig with a 4" SUA lift and 33's? It would be much appreciated. Pictures don't give me a good reference for that and search isn't helping. Many thanks in advance.

 

[charliemeyer007]

Pic's can be scaled. Take the pic showing what you want and measure something like the door width, then go to your rig and measure the door width.
The ratio of pic/actual is now fixed. Now measure ground to running board in pic >>> solve for actual that gives same ratio.

 

[msapers]

Pic's can be scaled. Take the pic showing what you want and measure something like the door width, then go to your rig and measure the door width.
The ratio of pic/actual is now fixed. Now measure ground to running board in pic >>> solve for actual that gives same ratio.

True, it's possible but I was hoping somebody might be able to walk out to their garage with a tape measure.

 

[charliemeyer007]

It always pays to ask questions or for help, but you need a plan for whenever nothing shows up!

Punch line for the joke - So what happened to the two boats and the helicopter?

 

[pb4ugo]

4" skyjacker springs, 33-10.50x15 maxis razr mt that actually measure around 32". The shackles are more or less a custom length.

 

[msapers]

4" skyjacker springs, 33-10.50x15 maxis razr mt that actually measure around 32". The shackles are more or less a custom length.

View attachment 4004758View attachment 4004759

Perfect, thank you! This is exactly what I needed to know as I'll be using the exact same suspension and tires.

 

[pb4ugo]

The tires drive fine. I think they're a weak mud tire. Imo, they're loud and not very aggressive. The price was right. I haven't run radials in years. I have about 12k miles on them. My bias ply boggers and buckshots seem quieter and of course more aggressive.