Need a 1FZ Cylinder Head

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

RiverCityDave

SILVER Star
Joined
Jan 5, 2010
Threads
19
Messages
408
Location
Austin, TX
Website
www.rivercitycruiser.life
There isn’t a lot of activity on this portion of the forum, but I figured I’d give it a shot anyway.

My machinist just let me know I’ve got a number of small cracks, so my original is done for. Anyone know of anything available?

I know I can still get a new one from Toyota, but its 1500+ shipping, then machine work, assembly, etc and that’s a big investment (though not one I’ve ruled out) for an engine I’ll likely replace outright in the next few years.

Pics included for fun.

DA267D0D-8EA6-4269-83E0-B4D397F3443B.jpeg


FFF1C1C3-F118-4A93-B1D3-4A6E1E2AD3B9.jpeg


535A51E6-0EF2-4313-8AA6-C606B4585490.jpeg
 
no help but when i needed to replace my transfer case, I used the parting forum on here and was able to get hold of a used one pretty reasonable. might check there if you haven't yet
 
no help but when i needed to replace my transfer case, I used the parting forum on here and was able to get hold of a used one pretty reasonable. might check there if you haven't yet
I have never really used those, I just looked and there is a good bit of movement on those threads, so I posted there. Thanks for the advice!
 
I have a 305k seized 1fz in an 80 in Dripping, We can pull the head and see if it’ll be an improvement on what you have.
 

Users who are viewing this thread

Back
Top Bottom