NEED 2F intake manifold

[mp_cude]

Was just about to bolt everything back up when i discovered a crack in my manifold....Anyone have one for sale or trade?

 

[tucson_sailors]

2F engine at BeepBeep

You may want to call BeepBeep Foreign parts. They have an 86 FJ60 with an engine that had a hole in the oil pan. They may be willing to part the top end stuff, since they cannot test the engine without replacing the pan.

If not, check with Tim in Marana and see if he has any 2F's floating around. They used in both the 40 and 60's, so should be fairly common.

Glenn in Tucson

 

[tucson_sailors]

BeepBeep contact info

You may want to call BeepBeep Foreign parts. They have an 86 FJ60 with an engine that had a hole in the oil pan. They may be willing to part the top end stuff, since they cannot test the engine without replacing the pan.

If not, check with Tim in Marana and see if he has any 2F's floating around. They used in both the 40 and 60's, so should be fairly common.

Glenn in Tucson

520-574-1234
5555 South Arcadia
Tucson, AZ 85706

Weekdays 8 - 5
Saturday 9 -12

 

[bsevans]

Take it to a good machine shop and have it TIG welded. I had the same issue with my intake and took it to the Machine Works in Tucson and it has been fine for over 7 years. Of course, I got rid of the factory exhaust manifold with that piece of crap heat riser that got stuck which was the source of the cracked intake. If that does not work for you, you can contact Tim Hill in Avra Valley. Last time I was at his place he had at least 30 F/2F intake manifolds laying in a pile on his property. Cell 520-240-3757

 

[OffRoad Rage]

Once you find a replacement, you might want drill out the flapper plate in the exhaust manifold and remove it. Then get the separator plate from $OR that will prevent recurrence. It'll give you some long term piece of mind.

 

[Ray K]

2F intake manifold

I think I have what you are looking for. I'll take pictures and send them soon. Call me if you want. 480 330-8840 Ray