Nardi wheel/Cruise Control (1 Viewer)

[Scott B]

Hi all,

I am having a restomod finished up right now on my '97 40th Anniv FJ80, and replaced the factory wheel with a wooden Nardi one. Pleased with the way it looks, but now trying to figure out what to do about the cruise control. I have the stem from the old wheel, and could try to attach it somewhere I suppose, but having trouble figuring out where. Also considered two 2-way switches in the dash (on/off + resume, and set/accel + decel).

Anyone else done anything like this/have any suggestions?

Thanks!

 

[gummycarbs]

On the '95+, is the cruise control stem mounted to the wheel itself and fed through the clock spring?

Up to '94, I believe it mounts to the turn signal switch assembly. Maybe you can adapt one from an earlier model.

 

[Scott B]

On the '95+, is the cruise control stem mounted to the wheel itself and fed through the clock spring?

Up to '94, I believe it mounts to the turn signal switch assembly. Maybe you can adapt one from an earlier model.

View attachment 3039840

Thanks for the suggestion. See below for an actual picture of the stalk/exploded view.

 

[White Stripe]

Look at a rostra cruise switch.

 

[Scott B]

rostra cruise switc

Just what I've been looking for!!! Thanks so much