My grandad used to only buy 4runners an they ALWAYS had the gold package, I think the 93 is gold. What difference did it make besides the gold yota bean?
My grandad used to only buy 4runners an they ALWAYS had the gold package, I think the 93 is gold. What difference did it make besides the gold yota bean?
Well I pulled the fan clutch and drained out some fluid and refilled with 20,000 cst fluid. It does pull stronger now but I am ticked because one of the screws I was supposed to loosen when the clutch is broke open stripped. So I couldn't fully drain it. So I filled it as best I could and ran it and will break it open again tomorrow and top it off. So it will be roughly 25 ml 20,000 and 25 ml stock fluid which is 3,000.
But it does on sooner and pull more air through the condenser and radiator. A good mod for anyone to do. But be more careful than I was when loosening the screws inside the clutch to drain it!
I got an old flasher switch and attached it as a CDL switch. For now it has a piece of white tape on it with a drawing. I moved the antenna down low and the rear defrost over one. It works though.
It is fancy. It took me at least ten minutes to locate tape, doodle the picture, and cut it to size. I'll offer my artistic services to anyone for a small fee.
I went over the driveline and greased it with molybdenum grease. I mean I packed it in and when I drove it around the driveline 'clunk' I'd been hearing was gone! It is smooth as silk when I shift from drive to reverse and what not from a stop.
He likes big bottomed girls I guess. You coming to the meeting Wednesday night? If you need a place to stay you can stay at my place. I have a spare room.
He likes big bottomed girls I guess. You coming to the meeting Wednesday night? If you need a place to stay you can stay at my place. I have a spare room.
It is fancy. It took me at least ten minutes to locate tape, doodle the picture, and cut it to size. I'll offer my artistic services to anyone for a small fee.
This is a cool little tool for switch relabeling. The labels are sized to fit when printed off and if you follow the instructions posted by NLXTACY they come out looking stock
Decided tonight to take all of the seats out and the carpet from the rear cargo area forward out of the cruiser and wash it. I don't want my 80 smelling like Clank's. Just saying.
And as long as I can keep people from losing their dinner in it I'll be good.
Wait is that a mickey ultra!? That fully explains your reaction to real beer.
We will have to work on that before you now it we will have you drinking beer like man.
By the way that's the way real 80s smell. I mean ones that get used for more than driving 2 miles to work and back.