Motor Mount Orientation (1 Viewer)

[teFJ601987]

I just replaced the driver side motor mount and the mount is touching the engine (?manifold). See attached pictures - 1st picture is from below and 2nd picture is from above. Does the motor mount need to be flipped?
(I am a beginner. Changing this motor mount was the biggest project I have tackled on my FJ60.)

 

[3_puppies]

thinking if you rotate it 180 degrees, it should clear.
in your 1st pic, the distance from center to right looks less than center to left

 

[OSS]

here's one mount oriented correctly

 

[teFJ601987]

Thanks for your help!