Most of 1986 FJ60 to part out

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2007
Threads
2
Messages
12
I was given most of a 1986 FJ60 (225,000 miles) by a friend. He wants the axles, wheels, transfer case and transmission. I want the frame. Everything else...name it, if I still have it it is yours. Too many parts to list prices. I have the 2F out and palleted. Let me say this: Someone did a restore on this vehicle in the past, and they did a poor job - Every fifth bolt missing, broken bolts, stripped bolts, hoses missing, etc... When I drained the crankcase oil, it had very good viscosity though and no filings. I have access to a comercial location for shipping purposes (forklift too). The front drivers door and quarter panel share a crinkle.
I am located in Jackson Wyoming, 83001.
You can E-mail me with request for pictures and availability at ian@internethaus.com or you can call me 307-413-9557.
 
emailed you about front bumper PS end cap and battery tray.
Thanks,
Paul
 
How about the drivers side "snake blinder"?

That's the piece of chrome that runs along the bottom of the doors from the front to back.

Thanks!
 
Need the u-bolts from the front axle if they are not demo'ed - shipped to 80126 please.
Thanks.
I'll check to see is the guy who gave it to me wants the U-bolts as part of the axle assemblies. Hold tight, he is hard to get a hold of sometimes.
 
How about the drivers side "snake blinder"?

That's the piece of chrome that runs along the bottom of the doors from the front to back.

Thanks!
I have that. Let me just check to make sure what shape it is in.
 
how about the front dumper driver side end cap?
 
Have that, looks to be in good shape. E-mail your address and I'll e-mail you a quote for shipping.

i already bought one. Thanks for looking.
 
Looking for front bumpstop extensions...
 
What color is the interior?
Do you have the black plastic dash plug that goes in the rectangular space between the interior light dimmer and the steering column?
 
Would you consider cutting the parking brake out of the floor? I'd like the body surrounding the hole and the lever assembly that mounts in the hole.
I'll take a look at what is involved. I'm going to restore the body and swap it with mine a little bit down the road. I'll see if the parking brake assembly can be removed without damaging the body.
 

Users who are viewing this thread

Back
Top Bottom