Mid South....Buy/Sell/Trade (1 Viewer)
- Thread starter Bomar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You were correct, Bomar! Put 'em on last night at the reduced price, and dude was waitin' for me when I pulled up to work this am. SPF!
Now, still have that set of 5 that need to go!
Now, still have that set of 5 that need to go!
I know this might not apply to a lot of peeps, but...
I have a set of (4) 15x8 Allied beadlocks for 8 on 6.5 that I've decided to get rid of. They come with all the hardware and dished outer rings in almost perfect condition. Rings are silver, and rims are black with circle windows.
I'll get pics when I go to Hot Springs this weekend.
$500 OBO
I have a set of (4) 15x8 Allied beadlocks for 8 on 6.5 that I've decided to get rid of. They come with all the hardware and dished outer rings in almost perfect condition. Rings are silver, and rims are black with circle windows.
I'll get pics when I go to Hot Springs this weekend.
$500 OBO
Last edited:
I've got a couple sets of rollers in Hot Springs. One set of steel and one set of aluminum. Not sure when they'll be able to get to Memphis, though. Interested?
Jordan7118 said:
Possibly interested. Don't really need the rims, but if that's how they come, I'll see if its somethin I can use. Just shoot me some pics and prices whenever you get around to it. I MIGHT be going to Superlift next weekend to wheel with those outta-towners. Haven't decided yet; doesn't look like there's anyone I know attending yet and I have an appt Tuesday that may have some affect too.
Lookin' for some 6 lug 17s. Prefer 7.5 to 8 width with a decent BS. Anyone?
Likely they'll get a beadlock kit, so that'd make a 7.5 become an 8.5, an 8 goes to a 9. So, 4 or 4.5" BS would put me neutral.
I'm not in a huge hurry. Maybe a month or so.
Otherwise, I'll start hacking up these Chevy 17s I got. They're funky and would need to be recentered to take a beadlock kit. Plus, bore the centers.
Or maybe I'll do a redneck internal beadlock using some tires and an inner tube
I'm not in a huge hurry. Maybe a month or so.
Otherwise, I'll start hacking up these Chevy 17s I got. They're funky and would need to be recentered to take a beadlock kit. Plus, bore the centers.
Or maybe I'll do a redneck internal beadlock using some tires and an inner tube
Tim is sellin' some 80 rims and tires.
https://forum.ih8mud.com/tires-wheels/507297-5-stock-80-wheels-tires.html
https://forum.ih8mud.com/tires-wheels/507297-5-stock-80-wheels-tires.html
Thanks Jordan. These were the ones I bought from yamapro down Madison way. Thought at one point they were the cause of my steering issues, but that turned out to be a caster issue (fix on the way). In the meantime I'd already bought some LX wheels, so I decided to go with those vs the 80 wheels.
Anyhow, got 5 tires/wheels for sale, $450 for the set.
Anyhow, got 5 tires/wheels for sale, $450 for the set.
17" 6-lug Chevy rims are for sale.
In Memphis. To put on a Toyota, the center hub will need bored. I can do that in the machine shop, but may take some time to get it done.
$150 as-is
In Memphis. To put on a Toyota, the center hub will need bored. I can do that in the machine shop, but may take some time to get it done.
$150 as-is
I think my LX just submissively urinated...
That's funny...
Not landcruiser related, but im still trying to sell my 2003 IS300 if anyone is interested or knows someone whos looking.
2003 Lexus IS 300 Sport Design
2003 Lexus IS 300 Sport Design
Bushmaster M4 Clone (non-SBR)
All –
I have moved over to the dark side of black guns and am strictly going Short Barreled Rifles (SBR) from this point on. As such, I am selling my only non-SBR rifle. This is a Bushmaster XM-15 that has been modified into a straight shooting and fast targeting tactical carbine. I am asking $1,400 for the complete package.
The rifle is equipped with an EOTech holographic weapons sight, an ARMS bi-level SIR rail system, an ARMS rear flip-up BUIS, a Midwest Industries front flip-up BUIS, a MagPul MIAD grip, a Tango Down front vertical grip, a low-profile gas block, a Viking Tactics padded sling, and a Browning 5015 travel vault with wheels (made by Pelican – model 1700).
This is a great package to get you out the gate and shooting. The rifle has less than 500 rounds through it and is in phenomenal shape.
The rail system on this rifle alone is approximately $375.00, add in the EOTech and the Pelican case and you are getting an incredible deal.
Please PM me with interest and/or questions…I would prefer to do a face-to-face sale with someone I know. If not, I will ship it from FFL to FFL.
Enjoy the pictures.
- Mark
Loaded Bushmaster XM-15:
Full Rifle View:
Detail of Upper and Lower with PMAG:
Length Comparison with my Mark18 Mod 0 – 10” SBR:
Length Comparison with my Mark18 Mod 0 – 10” SBR:
Length Comparison with my Mark18 Mod 0 – 10” SBR:
Browning Travel Vault:
Foam Cutouts for the Rifle:
Foam and Upper Detail:
Sling Swivel Detail:
ARMS SIR Rail System Detail:
EOTech in “On” position – I had to zoom in and adjust focal length to get the reticle:
EOTech reticle:
EOTech Rear View in “On” position:
Close-Up of Rear of EOTech:
EOTech – 4.25” long:
Safety Side of the Rifle:
Upper Receiver Detail:
All –
I have moved over to the dark side of black guns and am strictly going Short Barreled Rifles (SBR) from this point on. As such, I am selling my only non-SBR rifle. This is a Bushmaster XM-15 that has been modified into a straight shooting and fast targeting tactical carbine. I am asking $1,400 for the complete package.
The rifle is equipped with an EOTech holographic weapons sight, an ARMS bi-level SIR rail system, an ARMS rear flip-up BUIS, a Midwest Industries front flip-up BUIS, a MagPul MIAD grip, a Tango Down front vertical grip, a low-profile gas block, a Viking Tactics padded sling, and a Browning 5015 travel vault with wheels (made by Pelican – model 1700).
This is a great package to get you out the gate and shooting. The rifle has less than 500 rounds through it and is in phenomenal shape.
The rail system on this rifle alone is approximately $375.00, add in the EOTech and the Pelican case and you are getting an incredible deal.
Please PM me with interest and/or questions…I would prefer to do a face-to-face sale with someone I know. If not, I will ship it from FFL to FFL.
Enjoy the pictures.
- Mark
Loaded Bushmaster XM-15:
Full Rifle View:
Detail of Upper and Lower with PMAG:
Length Comparison with my Mark18 Mod 0 – 10” SBR:
Length Comparison with my Mark18 Mod 0 – 10” SBR:
Length Comparison with my Mark18 Mod 0 – 10” SBR:
Browning Travel Vault:
Foam Cutouts for the Rifle:
Foam and Upper Detail:
Sling Swivel Detail:
ARMS SIR Rail System Detail:
EOTech in “On” position – I had to zoom in and adjust focal length to get the reticle:
EOTech reticle:
EOTech Rear View in “On” position:
Close-Up of Rear of EOTech:
EOTech – 4.25” long:
Safety Side of the Rifle:
Upper Receiver Detail:
Forward Sling Detail:
Collapsible Buttstock Detail – Rifle Length – 32.75” collapsed / 36.5” extended:
Sling Detail – Viking Tactics Padded:
Rear sling Detail and Safety function:
Rear ARMS BUIS:
Front Midwest Industries BUIS:
Bushmaster XM15-E2S 5.56mm:
Bushmaster:
Upper in hinged position:
Bolt Carrier Detail:
Firing Pin Rear Detail:
Bolt Detail:
Hammer Detail:
Chamber Detail:
Collapsible Buttstock Detail – Rifle Length – 32.75” collapsed / 36.5” extended:
Sling Detail – Viking Tactics Padded:
Rear sling Detail and Safety function:
Rear ARMS BUIS:
Front Midwest Industries BUIS:
Bushmaster XM15-E2S 5.56mm:
Bushmaster:
Upper in hinged position:
Bolt Carrier Detail:
Firing Pin Rear Detail:
Bolt Detail:
Hammer Detail:
Chamber Detail:
Most detailed "for sale" threads ever! Great job, Mark! That's how you sell your stuff 
